1964 Sport Fury Cowl seal and ?

Interior

  1. Bob Jordan

    Bob Jordan Member

    Messages:
    9
    Likes Received:
    0
    Joined:
    Nov 6, 2019
    Location:
    Pinckney, MI
    Local Time:
    11:17 AM
    I know that the seal towards the front is the rubber cowl seal that can be purchased. My question is - what is that soft rotted out seal right behind the rubber cowl seal? Any idea where to get it? I'd like to try to find the real one before gluing on something else. Thanks [​IMG]
     
  2. Steve009

    Steve009 FBBO Gold Member FBBO Gold Member

    Messages:
    773
    Likes Received:
    683
    Joined:
    Aug 2, 2016
    Location:
    Ottawa
    Local Time:
    11:17 AM
    Not sure what it’s for. I thought it may be dual seals for water but I can’t see why that’s necessary. Either way I’m pretty sure joe Suchi has every piece of rubber for our 64s
     
  3. moparsteve636

    moparsteve636 Well-Known Member

    Messages:
    3,034
    Likes Received:
    682
    Joined:
    Dec 4, 2009
    Location:
    Mo.
    Local Time:
    10:17 AM
    That is not an OEM seal! some one put that there!
     
    • Agree Agree x 1
    • Steve009

      Steve009 FBBO Gold Member FBBO Gold Member

      Messages:
      773
      Likes Received:
      683
      Joined:
      Aug 2, 2016
      Location:
      Ottawa
      Local Time:
      11:17 AM
      maybe not the way his looks but mine has two strips of rubber across the back as well.
       
    • furyus

      furyus Well-Known Member

      Messages:
      1,443
      Likes Received:
      825
      Joined:
      Jan 5, 2010
      Location:
      weeki wachee, florida
      Local Time:
      11:17 AM
      Mine only has the one seal.
       
    • Red63440

      Red63440 FBBO Gold Member FBBO Gold Member

      Messages:
      2,303
      Likes Received:
      696
      Joined:
      Feb 5, 2011
      Location:
      NY
      Local Time:
      11:17 AM
      One on mine as well... 361 engine.jpg
       
      • Like Like x 1
      • retractable

        retractable FBBO Gold Member FBBO Gold Member

        Messages:
        297
        Likes Received:
        203
        Joined:
        Jan 11, 2016
        Location:
        New london MN
        Local Time:
        10:17 AM
        The three of mine have only one seal.
         
      • Steve009

        Steve009 FBBO Gold Member FBBO Gold Member

        Messages:
        773
        Likes Received:
        683
        Joined:
        Aug 2, 2016
        Location:
        Ottawa
        Local Time:
        11:17 AM
        I must have the Canadian model, one for snow and one for rain haha
         
      • wagonwedge330

        wagonwedge330 Well-Known Member

        Messages:
        170
        Likes Received:
        118
        Joined:
        Sep 12, 2016
        Location:
        NW Georgia
        Local Time:
        11:17 AM
        Anyone have factory tech bulletins? I’m
        sure many will remember (or maybe I’m that old..?), once upon a time before recalls were the thing, tech bulletins were received at dealership service and parts depts, this might have been a fix for something, and might be found in one of Chrysler’ Bulletins.
         
      • Bob Jordan

        Bob Jordan Member

        Messages:
        9
        Likes Received:
        0
        Joined:
        Nov 6, 2019
        Location:
        Pinckney, MI
        Local Time:
        11:17 AM
        It sits on a raised metal section almost like something is meant to go on top of it. Thank you for all the replies.
         
      • Red63440

        Red63440 FBBO Gold Member FBBO Gold Member

        Messages:
        2,303
        Likes Received:
        696
        Joined:
        Feb 5, 2011
        Location:
        NY
        Local Time:
        11:17 AM
        The extra rubber seal that you have on your car doesn’t look like it was made for that purpose. It looks like it’s broken down much worse than your original seal and appears like it was made of a different material.
         
      • Steve009

        Steve009 FBBO Gold Member FBBO Gold Member

        Messages:
        773
        Likes Received:
        683
        Joined:
        Aug 2, 2016
        Location:
        Ottawa
        Local Time:
        11:17 AM
        I just checked. Mine are off the car because it’s going through a paint job but one is clipped in (closer to firewall) and one was glued it seems (similar to yours)
         
      • Bob Jordan

        Bob Jordan Member

        Messages:
        9
        Likes Received:
        0
        Joined:
        Nov 6, 2019
        Location:
        Pinckney, MI
        Local Time:
        11:17 AM
        The only purpose of these seals at the back is to keep SOME of the water out but more importantly to keep hot underhood air from spilling out and into the fresh air intake. This is a CA non AC car so I'll guess that someone added this to keep the fresh air temp lower.
         
      • dmoore

        dmoore Mopar to the end FBBO Gold Member

        Messages:
        734
        Likes Received:
        566
        Joined:
        Nov 30, 2008
        Location:
        Virginia
        Local Time:
        10:17 AM
        Like others stated, it's been added.
         
      1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
        By continuing to use this site, you are consenting to our use of cookies.