WTB 1965 Coronet Exterior Trim

[69plywgn]

I'm looking for the left side exterior trim moulding (fender, door, quarter panel) for a '65 Coronet Deluxe two-door sedan.

From the '65 Parts Catalog, page 23-99:
- Ref. No. 1, P/N 2584 064-5, moulding package, fender side
- Ref. No. 19, P/N 2526 872-3, cap, quarter panel moulding rear
- Ref. No. 20, P/N 2584 142-3, moulding package, quarter panel
- Ref. No. 22, P/N 2594 138-9, moulding package, door outside

I need the trim and hardware. If you only have the trim, let me know. Joe Suchy has the hardware, but not the trim.

 

[PRND21]

Do you have pictures of what you need, I might possibly have what you need. What I have I don’t know if it’s Dodge or Plymouth.

 

[69plywgn]

No, I don't have a specific picture. I copied this image from the '62-'65 thread. I don't know if '65 Belvedere 1 trim is the same used on '65 Dodge Coronet Deluxe. I'll look at the '65 parts catalog again.

 

[69plywgn]

Here's two pictures of '65 Coronet Deluxe trim (front fender and rear quarter panel). I checked the '65 parts catalog and apparently they used different part numbers for Dodge and Plymouth. Hope this helps.

 

[PRND21]

What I have evidently is from a Belvedere 1. Sorry I couldn’t help.

 

[69plywgn]

Just curious, was your response based on my pictures or the apparent difference in part numbers. I guess I'm not convinced that Chrysler would manufacture different trim for their base model Dodge's and Plymouth's.
Do you have any pictures of your trim?

 

[PRND21]

What I’m going by is that there are only 2 pieces per side, from close to the tail light to halfway on the door. Also the profile of the piece is different. I’ll have to get some pictures tomorrow when I get to the shop. They would work and more than likely most people wouldn’t know the difference, you’d need to fill a few holes. What I’ve got would need to be refinished.

 

[69plywgn]

I only took two pictures as an example. The trim for the door would be the same style. I'd appreciate the pictures. It sounds like there is a difference between Dodge and Plymouth trim.
Thanks for your help.

 

[PRND21]

This is what I have. I believe it’s probably Plymouth.

 

[69plywgn]

You're correct. I looked at the Dodge and Plymouth dealer brochures. The Dodge is 3 pieces, the Plymouth is 2 pieces. Even at my age, I'm still learning things about MoPars.
Thanks again for your help.

 

[Mopar Girl]

I'm looking for the left side exterior trim moulding (fender, door, quarter panel) for a '65 Coronet Deluxe two-door sedan.

From the '65 Parts Catalog, page 23-99:
- Ref. No. 1, P/N 2584 064-5, moulding package, fender side
- Ref. No. 19, P/N 2526 872-3, cap, quarter panel moulding rear
- Ref. No. 20, P/N 2584 142-3, moulding package, quarter panel
- Ref. No. 22, P/N 2594 138-9, moulding package, door outside

I need the trim and hardware. If you only have the trim, let me know. Joe Suchy has the hardware, but not the trim.

 

[Mopar Girl]

I have the long molding NOS 2584143. Are u going to Mopar Carlisle this week?

 

[69plywgn]

- No, I won't be attending the event, but I suspect I'd probably find the trim pieces there.
- Would you forward a picture, description, and price of the piece you have?
- I realize this is an unusual request, but if you're at Carlisle and found the other two (or three) pieces in good used condition, I'd buy them from you.

Thanks

 

[Mopar Girl]

- No, I won't be attending the event, but I suspect I'd probably find the trim pieces there.
- Would you forward a picture, description, and price of the piece you have?
- I realize this is an unusual request, but if you're at Carlisle and found the other two (or three) pieces in good used condition, I'd buy them from you.

Thanks

 

[Mopar Girl]

- No, I won't be attending the event, but I suspect I'd probably find the trim pieces there.
- Would you forward a picture, description, and price of the piece you have?
- I realize this is an unusual request, but if you're at Carlisle and found the other two (or three) pieces in good used condition, I'd buy them from you.

Thanks

 

[Mopar Girl]

I’m sorry I can only open the carton the molding is packaged from by Chrysler for display to potential buyers at Carlisle to prove it to be mint condition N O S. Also it’s unfortunate you are not attending as we really can’t ship this 7 foot molding in its carton safely. Perhaps you have a friend or associate who is attending that would be able to pick it up for you. We sell no used parts to speak of and only NO S. Thank you for the inquiry.

 

[Mopar Girl]

Price is 225

 

[Mopar Girl]

I’m sorry I can only open the carton the molding is packaged from by Chrysler for display to potential buyers at Carlisle to prove it to be mint condition N O S. Also it’s unfortunate you are not attending as we really can’t ship this 7 foot molding in its carton safely. Perhaps you have a friend or associate who is attending that would be able to pick it up for you. We sell no used parts to speak of and only NO S. Thank you for the inquiry.