• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1966 Coronet 440 2 door sail panel/ 1/4 panel molding

Status
Not open for further replies.

superbird6bbl

Member
Local time
3:56 PM
Joined
Jul 6, 2012
Messages
23
Reaction score
25
Location
Terre Haute
Feedback: 0 / 0 / 0
I am looking for the molding that goes between the roof and the quarter panel that covers the seam between the two. I need both sides for my 1966 Dodge Coronet 440 2 door.
 
originals are almost always pitted but they are being reproduced by Classic Industries under part # MB2252--$145 a pair--I tried finding used for many years but they're ALWAYS pitted & look terrible
 
originals are almost always pitted but they are being reproduced by Classic Industries under part # MB2252--$145 a pair--I tried finding used for many years but they're ALWAYS pitted & look terrible
Thanks for the info. I found a pair on here for $50.00 and one was great and the other about a 10 footer. They will work just fine for my application.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top