• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 1966 Plymouth Belvedere 4 door parting out

Status
Not open for further replies.

'68 Charger

Well-Known Member
Local time
4:36 PM
Joined
Jun 18, 2012
Messages
1,730
Reaction score
573
Location
Akron, Ohio
Feedback: 67 / 0 / 0
Contact seller
1966 Plymouth Belvedere I four door parts car. White with blue interior. 225 slant 6 torn apart. Auto trans.

Car was in Nevada but it appears that it was originally from Salt Lake City, UT according to some paperwork found in the car.

I just received this car, pics are from the ad.

It has a 1967 trunk lid with the '67 trim panel. Trunk lid is rusty underneath.

Other rust areas before doing a thorough inspection are, battery tray area, lower quarters, front fender dog legs, floor boards.

Solid: trunk floor, all frame rails, non A/C firewall, cowl, RH inner fender, torsion bar x member, wheel wells etc.

Front windshield is cracked.

I will be parting it out soon and updating this thread with condition and pics of parts removed.

Here are few prices for now per site rules:

- 1967 Plymouth trim panel (on trunk) $225.00
- Hood latch/release/hook/striker $100.00
- Hood $250.00
- Hood hinges $80.00 (pair)
- Gauge cluster $150.00
- Driver's side mirror $75.00

I know I didn't list some of the major parts yet, but I need to evaluate in person before setting prices. But please inquire on any parts.

Parts are located in Las Vegas, NV

Thanks

00e0e_gqSelg2B0i_1200x900.jpg 00e0e_qCb3Lyh2KH_1200x900.jpg 00v0v_5drk284cSoS_1200x900.jpg 00Z0Z_cm35lZr6GJK_1200x900.jpg 00000_li345rnhVY0_1200x900.jpg 00Z0Z_6ztnKd04SPt_1200x900.jpg 00f0f_5FtcUBEf9yp_1200x900.jpg 00909_fIKl8uqkULS_1200x900.jpg 00Z0Z_X4ELJG6emS_1200x900.jpg 20180315_131335.jpg
 
There should be black plastic knobs for the heater controls on the dash, are they still there and what do you want for them?
 
Update on sold parts:
- gas cap
- heater control knobs
- heater control face plate
- horn ring
- defrost vents
- 225 /6 cylinder head

Sale pending:
- steering column w/shift & t/s levers

Pics & prices of removed parts coming soon

Thanks
 
I’d be interested in the fender tag, broadcast sheet or any other factory documentation you come across.
 
The value is in the information and not the tag. It’s one more piece in a really big puzzle. Every tag destroyed means one less piece.

As far as what’s it worth? Not much. But when you put it together with hundreds of other tags, it starts to mean a lot as the picture of how the company and a specific plant did things becomes much clearer.

If the info on a tag from a parted car saves one person from buying a fake car with a bogus tag, it could be worth hundreds or thousands of dollars...to them.
 
Hello, any chance you have the certicard? I'd be interested, thank you!
 
Hello, any chance you have the certicard? I'd be interested, thank you!


Hello and thanks for replying. I haven't seen a certicard in it's usual spot and not as of yet anywhere. If it pops up you're 1st in line.

Thanks
 
Are you in a position to sell the Lower control arms? Do they have sway bar mounts?
 
I need this lower panel in picture if you have it on your parts car and its good pm me plaese.

Thanks

67 plymouth rear panel.JPG
 
Status
Not open for further replies.
Auto Transport Service
Back
Top