WTB 1968-9 emission control

[robert horman]

Wanted 1968 MOPAR emission control. See pictures Bob Horman

 

[HALIFAXHOPS]

I have one nos want pics? $90 and the ride.

 

[HALIFAXHOPS]

Sorry totally diffrent bracket and can also be used.

 

[HALIFAXHOPS]

$50?

 

[robert horman]

$50?

View attachment 1462427

View attachment 1462428

View attachment 1462429

The bracket isn't made by anybody. This control is installed on 1968-9 B Body HEMI cars. I own a 68 dodge charger HEMI car thanks for your interest in helping me bob Horman

 

[HALIFAXHOPS]

Bob if you have yours still did you try to adjust it yet?

 

[robert horman]

Bob if you have yours still did you try to adjust it yet?

I personally don't know if it works . It was used when I bought the control. I have looked for a service bulletin on this control from Chrysler Never found bulletin. Now if you have a Chrysler bulletin and would make me a copy of the bulletin, I would be willing to pay you for the copy. I have a Sun machine #1120 with exhaust analyzer working machine I may be able to set it on my Hemi Charger getting the control into the system just like Chrysler set it up in 1968. I also have a NOS new control like your picture without the bracket on it. I just want to make my car right with all parts car came with. I believe to use this control , the control changes the vacuum from the carb retarding the distributor cleaning up the exhaust. Right? Bob Horman First I want to thank you again for the original spring and washers you sent me a week bch. I have a second distributor and want to have a backup distributor. Parts for original hemi cars are getting hard to find good cores. My second distributor I would like to get and new bearing (bronze) and do you have any distributor shaft to sell. If you do have replacement parts, I would like to buy the shaft from you or send the distributor to you to install shaft and bearing. Can you do this for me. I would pay for your service on my distributor.

 

[HALIFAXHOPS]

I have the sun card I can scan for you. it is more of a delay valve really.

 

[robert horman]

I have the sun card I can scan for you. it is more of a delay valve really.

I believe that valve retarded the distributor to pass California en=mission in 1968-9. Chrysler I was told put the valve on all Street Hemi cars 1968-9 even if there were states that did not have emission laws. Bob Horman I will pay you for you time and a copy of the emission information you have. Do you sell bronze main shaft bearing and shaft for 68 original Hemi distributors? bob Horman

 

[HALIFAXHOPS]

I have the bushings, have to look at what the shaft number is which one 4 bbl, cross ram at or MT. All different