• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 1970 Plymouth B Body A/C Under Hood lines

Status
Not open for further replies.

soundhd

Well-Known Member
Local time
9:12 PM
Joined
Oct 7, 2012
Messages
668
Reaction score
173
Location
Ann Arbor Michigan
Feedback: 0 / 0 / 0
Looking to purchase a set of the factory A/C under hood lines for a 1970 Plymouth B Body. Need them all:
Compressor discharge and tube assembly with muffler assembly (goes from the compressor all the way along the front of the radiator to the condenser).
Receiver dryer and sight glass assembly with low pressure cut out switch.
Liquid tube assembly from the condenser to the drier.
Liquid Hose from the drier to expansion valve assembly.
Compressor suction hose (with muffler assembly) from firewall to compressor
If you know anyone that has any of these please PM me.
Also if anyone near SE Michigan has a set that I can borrow to use as templates to get them made.

All parts shown in 1970 Plymouth B Body Shop Manual section 24 page 71 Figure #15.

thanks
 
check out ebay listing # 223450501412 for a hose, and 223450504955 for a valve if needed.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top