331 Chrysler hemi. Bored 30 over (336 cubic inches) Arias 10:1 compression pistons, isky 465 lift cam, spin on oil filter adapter, chevy water pump adapters, ARP head studs, main studs, oil pan studs, hot heads aluminum 4 barrel intake (powdercoated)lower alternator/ac brackets. I have the upper mounts too. Hot heads water crossover, HH valley cover, adjustable pushrods,msd ready to run distributor, small block 727 adapter, and flexplate, modified 318 motor mounts. Motor professionally machined, magged, and assembled by Godwin & Singer St. Pete, Fl. This hemi was not a cobbled together junk parts motor put together 8,500.