• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 4 bbl intake for 318 poly

Status
Not open for further replies.

BeefSupreme

New Member
Local time
4:36 PM
Joined
Jul 1, 2021
Messages
1
Reaction score
0
Location
Oklahoma City
Feedback: 0 / 0 / 0
Hi All! Im brand new to the forum, and this is my first post. i recently picked up a '66 Coronet 4 door with the 318 poly, and this is my first adventure into the Mopar world. I know these motors are less common, and the aftermarket is hard to come by. I'd like to find a 4 bbl intake for it (factory or aftermarket) if any one has one. Just looking to pep it up and make it a little easier to get parts for.

Thanks in advance!!

-Ed
 
Ah man
Tough to find I believe those are rare
 
Welcome to the forum! Lots of good info and people here. Those intakes are a bit tough to find, but they are around. They tend to be a bit expensive when you do fine one. Original cast iron ones are heavy. You just about need two people to place one on the engine if it's sitting in the car. Good luck with the project!
 
Status
Not open for further replies.
Auto Transport Service
Back
Top