• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 440 Rebuilt Rotating Assembly

Status
Not open for further replies.

Schober Motorsports

Well-Known Member
Local time
7:19 PM
Joined
Jun 20, 2010
Messages
482
Reaction score
388
Location
Drag Strip
Feedback: 2 / 0 / 0
Contact seller
440 Rebuilt Rotating Assembly, bought as a part of a short block... Story is that the engine was assembled for a customer, customer didn't pay up, and the motor sat in a shop for a while until I bought the short block. I took this rotating assembly out as I had no use for it. I have been told everything was checked and machined ready to go. Pistons are new, they have new rings and bearings on them as well, zero run time.

$400 obo

Located in Freeport, FL 32439

IMG_1855.JPG
IMG_1856.JPG
IMG_1860.JPG
 
crank cast ? or forged. may be interested
 
Casts are square on the counterweights, forged are rough and rounded.
 
Sipping to 96750 ?
prob. way to much ?
 
I can flat rate the pistons, thats the easy part. However yes the crank will be a bit more difficult. I will get back to you on that.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top