• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

4speed diff. between 318 vs 383?

megaivtes

Well-Known Member
Local time
3:32 PM
Joined
May 10, 2016
Messages
102
Reaction score
39
Location
Central NJ
So a deal I was looking at for a 66 satellite big block seems to not be happening. I’m going to look at another 66 satellite with 318 and 4speed.

Is the 4 speed the same between 318 vs 383?
As far as I can tell, it’s a straight swap from the 318 to the big block, using the same 4 speed.
 
Last edited:
The bell will be different and possibly the drive shaft length, but both should be a 23 spline unit and a straight swap, to my knowledge.
 
There could be a difference if the 833 is an overdrive trans. In that case, the input bearing retainer diameter may not fit your bell house...............................MO
 
Auto Transport Service
Back
Top