• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

64 BB 4 speed bellhousing in a 70?

spoolinhard

Well-Known Member
Local time
8:20 PM
Joined
Apr 4, 2010
Messages
420
Reaction score
178
Location
Iowa
I have an iron big block bellousing from a 64 b-body. I am going to be installing this in a 70 charger. Will I have any issues with the mounting point for the Z-bar on the trans mount, or am I going to have to make my own bracket/mount to get the z-bar to line up with the frame bracket?
 
I don’t think the z bar will line up. The engine sets farther back on 66 and up . 64 ball stud is mounted on a bracket. 66 up screws right into bellhousing.
 
I think I cut and modified the 64 part to fit. I trimmed it, rotated it, and only used 1 bolt. If I find any pics, I will iPhone them and post them.
 
Auto Transport Service
Back
Top