WTB 66-70 b body Dana 60

Status
Not open for further replies.

Embracetomorrow

Active Member
Feedback: 0 / 0 / 0
Local time
9:50 PM
Joined
Nov 11, 2020
Messages
25
Reaction score
13
Location
Oshawa, Ontario Canada
Looking for a complete Dana 60 from a 66-70 b body. Not looking for a truck Dana made to fit a b body. Located in Ontario Canada but willing to travel.
 

zyzzyx

FBBO Gold Member
FBBO Gold Member
Feedback: 0 / 0 / 0
Local time
8:50 PM
Joined
Aug 5, 2011
Messages
2,935
Reaction score
3,785
Location
Lisle, Illinois
Not sure, but I think 68-70 B body is wider than a 66-67. Be careful what you wish for!
 

69 MBee

Well-Known Member
Feedback: 0 / 0 / 0
Local time
8:50 PM
Joined
Jun 2, 2017
Messages
132
Reaction score
135
Location
Missouri
I think you’re correct, I believe 68-70 rear end is just under 3/4” wider

I got a couple leads for you on a '70 B Body Dana with 4:10 (603109-5) if I remember correctly. It's in Southern Missouri. I purchased another Dana from the guy a week ago.
or a 70 (603109-2) 3:54 in Oklahoma I passed on as it wasn't what I was looking for.
PM me and I'll pass you ph numbers if your interested.
I don't believe either guy wants to ship as the cost has gotten ridiculous
 

70gtx440dana

FBBO Gold Member
FBBO Gold Member
Feedback: 22 / 0 / 0
Local time
9:50 PM
Joined
Mar 8, 2010
Messages
715
Reaction score
146
Location
Grand Ledge, MI
It may not work if you are not a facebook member....not sure. If you can get the sellers homepage you have to scroll down a bit.
 

AR67GTX

FBBO Gold Member
FBBO Gold Member
Feedback: 4 / 0 / 0
Local time
8:50 PM
Joined
Jan 28, 2012
Messages
3,165
Reaction score
2,258
Location
Arkansas
What is the Dana 60 axle flange to flange width of a 66/67 Dana? All I can find is 54.936” which is listed for 1966 - 1969. I can’t find a listed flange to flange width for a 66/67 BOM 602829 Dana that is different (at least as of yet).
 

Embracetomorrow

Active Member
Feedback: 0 / 0 / 0
Local time
9:50 PM
Joined
Nov 11, 2020
Messages
25
Reaction score
13
Location
Oshawa, Ontario Canada
What is the Dana 60 axle flange to flange width of a 66/67 Dana? All I can find is 54.936” which is listed for 1966 - 1969. I can’t find a listed flange to flange width for a 66/67 BOM 602829 Dana that is different (at least as of yet).
"dana 60rear end widths, drum-to-drum:
66-'67= 59 1/2"
'68-'70= 60 1/8"
'71-'72= 63"

flange-to-flange 66-69 B-body 54-15/16" 70 B-body 54-29/32"
71-74 B-body 57-47/64"
 

AR67GTX

FBBO Gold Member
FBBO Gold Member
Feedback: 4 / 0 / 0
Local time
8:50 PM
Joined
Jan 28, 2012
Messages
3,165
Reaction score
2,258
Location
Arkansas
OK - so sounds like housing is - flange to flange - the same but backing plate, axles, etc account for some additional track width for 68/69. Is that right?
 
Status
Not open for further replies.
Top