WTB 66 Satellite Quarter Panel upper trim pieces

WTB - Mopar Parts and Cars Wanted

Thread Status:
Not open for further replies.
  1. 66plysat

    66plysat Well-Known Member

    Messages:
    145
    Likes Received:
    73
    Joined:
    Feb 11, 2010
    Location:
    Rancho Cucamonga, Ca.
    Local Time:
    11:28 AM
    I just heard from the shop that is polishing the upper trim for my 66 Satellite. He told me that the long quarter panel upper trim pieces were bent/damaged in the anodizing tank.

    So now I'm on the hunt for the upper trim for both the driver and the passenger side upper quarter panel trim pieces.

    These are the pieces that run along the top of the fender/door/quarter panel. Let me know if anyone has these pieces, Thanks
     
  2. Joe66satellite

    Joe66satellite Well-Known Member

    Messages:
    185
    Likes Received:
    75
    Joined:
    Nov 30, 2018
    Location:
    Las vegas
    Local Time:
    11:28 AM
    15628968365827227019174608090478.jpg
     
  3. Joe66satellite

    Joe66satellite Well-Known Member

    Messages:
    185
    Likes Received:
    75
    Joined:
    Nov 30, 2018
    Location:
    Las vegas
    Local Time:
    11:28 AM
    I thought maybe a picture might help, and seeing as yours aren't available to have a picture of just trying to be a helpful fellow fbbo member good luck as you can see my not in that great of shape either I don't know if anybody reproduces them and if so they're probably not worth buying from what I've learned about aftermarket trim parts
     
    • Thanks! Thanks! x 1
    • 66plysat

      66plysat Well-Known Member

      Messages:
      145
      Likes Received:
      73
      Joined:
      Feb 11, 2010
      Location:
      Rancho Cucamonga, Ca.
      Local Time:
      11:28 AM
      Thanks for the picture, hopefully it will help in my search!
       
    • cr8crshr

      cr8crshr Well-Known Member

      Messages:
      3,172
      Likes Received:
      4554
      Joined:
      Feb 13, 2009
      Location:
      Northwest Nevada
      Local Time:
      11:28 AM
      Those are extremely hard to come by. I had a set that I sold earlier this year. If you do find them, they most likely are slightly faded and/or damaged in some way. There is an option for you but it requires some body work. Some remove them completely and have the holes welded up. They then swap out the turn signals on the fenders for a 66 Barracuda turn signal which looks the same but is finished on the aft end of the signal body. Unlike the Satellite ones that slip into the front fender belt line trim pieces. Looks very good too. Sad I know that these pieces are very rare and hard to come by but that is the nature of this hobby. Good luck with your search and I will try and keep an eye open for some when and if they pop up. By the way...If you need anything else for your project, I have a tone of extra parts for the '66 Satellite. Let me know what you might be looking for and I will check to see if I have it. Most likely I do...cr8crshr/Bill:thumbsup::thumbsup::thumbsup::usflag::usflag::usflag:

      DSCN0288.JPG DSCN0294.JPG
       
      • Thanks! Thanks! x 1
      • 69a100

        69a100 Well-Known Member

        Messages:
        6,491
        Likes Received:
        8574
        Joined:
        Aug 22, 2012
        Location:
        The Real World
        Local Time:
        11:28 AM
        If I'm reading this correctly, the shop messed up your trim and now you have to buy new stuff?
        Was the trim bad before you dropped it off?
        Why'd the shop mess up your trim?
        Why are you still doing business with them after this?
        Why are they making you buy new trim, why don't they fix/repair it?
        There's a ton of stuff here I don't understand with what's happening? Good Luck
         
      • 66plysat

        66plysat Well-Known Member

        Messages:
        145
        Likes Received:
        73
        Joined:
        Feb 11, 2010
        Location:
        Rancho Cucamonga, Ca.
        Local Time:
        11:28 AM
        Update- the guy polishing my trim has located and bought the drivers side quarter panel trim to replace the trim that was damaged. I still need the passenger side quarter panel trim. There's a NOS piece on ebay but the guy wants $350 for it. If anyone has a spare piece laying around please let me know. (I know I'm dreaming). Thanks
         
      • cr8crshr

        cr8crshr Well-Known Member

        Messages:
        3,172
        Likes Received:
        4554
        Joined:
        Feb 13, 2009
        Location:
        Northwest Nevada
        Local Time:
        11:28 AM
        That price is very fair due to the rarity of these pieces. I bought a NOS piece back in 2004 for a left rear piece and it was 350.00 also. As I said, they are rare and very expensive. Me personally I would jump on it regardless of the price being asked because it is very fair. Just suggesting is all...cr8crshr/Bill:thumbsup::thumbsup::thumbsup::usflag::usflag::usflag:
         
      Thread Status:
      Not open for further replies.
      1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
        By continuing to use this site, you are consenting to our use of cookies.