67 Hemi K Member Steering Box Bolts

[Bold & Old]

Hello folks...........

I recently discovered that my 67 Hemi K member (not installed) manual steering box bolts were smaller (1/2 inch course threads) than the 440 K member bolts (9/16s course threads) that I just removed.

Has anyone have a photo or two of the smaller original 66-67 hemi bolt and washer?

Thanks in advance everyone

 

[Aron Gleason]

You could ask Scott at Harms Automotive in Spokane Washington

 

[Bold & Old]

You could ask Scott at Harms Automotive in Spokane Washington

Yes he did my carburetors for me.... Thank You

 

[moparmarks]

67 and down frames use 1/2" box bolts and 68-up use 9/16"
Did you need some of 1/2" ones?

 

[Bold & Old]

67 and down frames use 1/2" box bolts and 68-up use 9/16"
Did you need some of 1/2" ones?

Yes sir yes sir (3) bags full....

 

[moparmarks]

I'll see what I have and PM you.

 

[Bold & Old]

I'll see what I have and PM you.

Thanks

 

[Bold & Old]

The Hemi E body and B body K member are the same for all years?

I have another question regarding the 67 440 idler arm and the Hemi idler arm.

I purchase a new after market idler are on eBay last year for the hemi.

The original 67 440 idler arm that original on front suspension is not the same as the new one.

so..... is there a difference between the 440 arm and the hemi arm for 67?

Thanks....... in-advance for those who can sled some light on the subject!

 

[moparmarks]

Sorry guess I'm out of the steering box bolts.
The difference is 66-7 idler arm has a stud and the 68-up has a bolt and nut.

 

[Bold & Old]

Sorry guess I'm out of the steering box bolts.
The difference is 66-7 idler arm has a stud and the 68-up has a bolt and nut.

Thank you....

 

[toolmanmike]

Start a part wanted thread instead.

 

[Bold & Old]

Start a part wanted thread instead.

Thank you sir.... will do!!

I love this web site! mIke