FOR SALE 68/69 Dodge Coronet/Super Bee Convertible 4 piece belt molding set

[pearljam724]

68/69 Super Bee/Coronet/Satellite Convertible 4 piece belt molding set. Presentable for a driver as is with minor pitting. You could also rechrome for a very reasonable price and save a couple hundred dollars or make a little under two hundred. If bought, I can give you very good advice and contact information where you can do that at a very reasonable price.
$125 free shipping to continental U.S. only. First person to say they want them and I receive a payment via PayPal they are yours. Im a reputable seller on here. On here daily. Particularly late evenings.

 

[69Coronetrt]

That dog leg is different for Dodge and Plymouth. What did these come from?

 

[pearljam724]

That dog leg is different for Dodge and Plymouth. What did these come from?

Ok, thank you. I wasn’t aware of that. They are original to my car. 69 Dodge Coronet 500

 

[pearljam724]

I corrected the title.

 

[PurpleBeeper]

Honestly...…. I "think" the "dog leg" (corner) pieces are the same between dodge/Plymouth convertibles 68-70. I "think" the only pieces that are different on the convertible trim between the two is the trim that runs along the quarter windows (the 18" or so long stainless piece)….at least that's what I "thought"

 

[friendofvirgil]

I own a 69 Roadrunner convertible I've had since 1979. The dog legs look exactly like the ones from pearljam724's 69 Dodge Coronet 500. When I get it down off the lift, I'll take a picture and add it here. I'm not suggesting 69Coronetrt is wrong. I simply disagree. 69Coronetrt may have ones produced from another Chrysler supplier and has seen a difference in a number of Dodges and Plymouths. For me, I have seen quite a few 68-70 B-body convertibles attend Spring and Fall Flings in Van Nuys over the last 18 years and at Mopar Nationals Columbus-Indy- back to Columbus in the 90s and my conclusion is they are the same parts, Dodge or Plymouth.

 

[5wndwcpe]

Honestly...…. I "think" the "dog leg" (corner) pieces are the same between dodge/Plymouth convertibles 68-70. I "think" the only pieces that are different on the convertible trim between the two is the trim that runs along the quarter windows (the 18" or so long stainless piece)….at least that's what I "thought"

That was my understanding as well but oddly enough, Mike shows two different listings. You would think if they were the same, he would show them that way.

http://www.beaparts.com/item_detail.aspx?id=1413

http://www.beaparts.com/item_detail.aspx?id=1136

 

[QuickBpBp]

Those small pot metal transition pieces are definitely different between 68-70 B-body Dodge and Plymouth convertible there are short and long ones. I also believe the outside qtr. glass belt molding is different length too as they are different part numbers for the same year...