FOR SALE 68/69 Satellite/RR/GTX parting out

[bagman68]

Assorted collection of body, interior, suspension, soft parts, etc. for 68 & 69 B-body. Satellite hood and deck lid, heat-A/C boxes, one right side door and front fender, misc. interior and exterior stainless including nice lower exterior stainless trim panels, good headliner roof bows, two complete drum brake front suspensions including K-members, one transmission crossmember support, rear bumper braces, RR dash (rough), lower black dash pad, 440 hood inserts, new Edelbrock valve covers, new AMD hood hinges, three grille center sections, two pair of taillight bezels and lenses (one set mounted on Satellite back half), three steering wheels, new front and rear glass plus one used rear glass, two sets of vent windows, one tinted the other clear, new windshield weather strip, new trunk weather strip, good fuel tank, late 70 440 block, crank and two intakes, wiring harness pieces/parts, two instrument panels, misc. bezels, bolts, fasteners, linkages, gaskets, probably more. See pictures. Taking reasonable offers on all or part. See something you want, let me know. Located in East Texas - 75605.

 

[bagman68]

additional pics

 

[bagman68]

the last few.

 

[rick moreno]

Hiya bagman68, greetings! I hope you find yourself well. My names Rick, i noticed your ad this morning maybe an hour after it posted. Just now found the time to reply. Anyhow, good Sir, I am in need of several items you have there. Starting with the k-member. Is it for a BB? I'm working on a 69 RR. I also need the front windshield, the hood inserts that have the 440 emblem, the windshield gasket, wiring harness (I've been waiting on yearone to send me the rear light harness but quite honestly losing my patience with them). Wiring harness I need would be that one as well as the under dash harness and whatever else. So far I've replaced the engine and front light harness. A quarter window for the passenger side. Trunk seal and the front light bezels. I'm sure there's more but that's all I can think of right now. I also noticed you're in Longview, TX. I'm in OKC. Little over 5 hr drive, so very doable, cause I'm sure shipping a k-member wouldn't be much fun. Just a friendly FYI, I haven't posted anything on this site before. This is my first time replying. Although I've probably read every thread on here twice over, I'm an active member but have been quietly watching and reading from the shadows for quite some time. In short, what I am respectfully trying to say is that this is a serious inquiry. Please lmk what you think and how much youre asking for said items or maybe a ballpark figure on the parts I mentioned as a whole. I would make an offer but quite honestly I'm at a loss on that one. Ty for taking the time to read this rather lengthy mess. I anxiously await your reply. Thanks again!
Sincerely, Rick

 

[bagman68]

Hello Rick. I was just in Norman/Noble, OK drag racing a few weeks back .. know right where you are. Sounds like you could use a bunch of what I have and, I'm motivated to get rid of as much as I can. Surprisingly, I've gotten 8 inquiries already since posting this morning. The RF fender is a verbal, and a few are interested in the suspension parts plus the dash assemblies. Given your list of needs, I think we're in the ballpark of say, $800? If you can come take a look soon I'll hold off committing on some of what you want. Thanks - Bill

 

[erikcroissant]

Hey there, I’m looking for a few nuts and bolts. I need:
1 lower ball joint castle nut-the main one that attaches the ball joint to the lower control arm
1 strut rod nut-need the small one that faces the front of the car
6 leaf spring mount nuts-these are the small nuts that attach the front leaf spring mount to the body
3 of the screws that mount the steering column to the firewall, they screw in from under the dash

Let me know what you’ve got.
Thanks,
Erik

 

[rick moreno]

Hello Rick. I was just in Norman/Noble, OK drag racing a few weeks back .. know right where you are. Sounds like you could use a bunch of what I have and, I'm motivated to get rid of as much as I can. Surprisingly, I've gotten 8 inquiries already since posting this morning. The RF fender is a verbal, and a few are interested in the suspension parts plus the dash assemblies. Given your list of needs, I think we're in the ballpark of say, $800? If you can come take a look soon I'll hold off committing on some of what you want. Thanks - Bill

Wow, thanks Bill. That's a pretty good figure. Man, I hate it when I put myself in these positions lol. "It's a great deal, but it's too much, but you know how much I'd be saving?!".
So the battle within begins once again. What to do what to do lol. I'm sure you know what I mean. I have to ask though, in case I decide to not put myself put there (always do anyway), but how much for the k-member alone? That's primarily what I need the most at this point and I would drive down there to pick it up. In any case allow me to make some numbers and I'll let you know here soon if we're a go. Don't hold back on my part though Boss. However I do appreciate that very nuch. Also* what kind of condition are the wiring harness in? Can they be used? If so which ones do you have?
Thanks again!
Oh, and Thunder Valley, eh? Nice! Great place.

 

[xghobo]

Looking for the clevis pin and push on washer that holds the front parking brake cable to the pedal assembly.
ThNk you

 

[GTXMoparman]

Do you have a picture of the lower black dash pad?

 

[bagman68]

Looking for the clevis pin and push on washer that holds the front parking brake cable to the pedal assembly.
ThNk you

I have both the pin and retainer, perfect condition.

 

[F4R/T]

I’m looking for all ac hoses and lines with a good core compressor for my sport satellite with a factory 383 if you have them? I need everything including the line across the intake on the driver side, also the wood grain corner dash trim on the driver side.

 

[bagman68]

I’m looking for all ac hoses and lines with a good core compressor for my sport satellite with a factory 383 if you have them? I need everything including the line across the intake on the driver side, also the wood grain corner dash trim on the driver side.

All I can help you with is a compressor, a good core, turns freely but will need to be checked out. Also have the clutch engagement coil, but no pulley assy. I have a filter/dryer - NOS - still capped with pressure switch, but functional condition unknown. I can get you some pics if you're interested.

 

[bagman68]

Do you have a picture of the lower black dash pad?

Besides the radio bezels and plastic trim around the glove box, this is all I have.

 

[albert 5694]

Looking for the switch and bracket for the emergency brake light this would be the one that is down on the emergency brake assembly.

 

[bagman68]

Looks a little rough, but it has a strong spring and it checks out with an ohmmeter. $18 including postage, mounting screw included.

 

[BigBlock61]

How much for the black and silver radio bezel?

 

[bagman68]

How much for the black and silver radio bezel?

$30 including postage

 

[BigBlock61]

$30 including postage

How much to ship it to 48180? How do I pay you?

 

[bagman68]

How much to ship it to 48180? How do I pay you?

$30 total, I'll cover the postage. I hope you can wait .. I'm out of town until May 21st. If that's acceptable we'll work out payment details then and I'll get it in the mail the week of May 22nd. Sound ok?

 

[BigBlock61]

Yea my Coronet isnt even close to being ready for that part.