Just Send It
Well-Known Member
SB Morel Hydraulic Roller racing lifters
Part # 6072
Set of 16
Wheel diameter: 0.810
Body diameter: 0.903
Tie bar is bent and will fit a stock block without grinding
Full specs are below within the bottom image
These lifters are top of the line from Morel and have less than 50 road miles/10 passes at the 1/8 mile. They worked flawlessly in my small block. They're rated for 7,500+ rpms. The only reason I'm selling is because I've switched to a solid roller setup.
Cost new was $1,300. I'll sell them for $700 shipped anywhere in the lower 48 States.
Venmo and PayPal Friends and Family are okay.
Located in Central Oregon if you'd like to come take a look at them
Part # 6072
Set of 16
Wheel diameter: 0.810
Body diameter: 0.903
Tie bar is bent and will fit a stock block without grinding
Full specs are below within the bottom image
These lifters are top of the line from Morel and have less than 50 road miles/10 passes at the 1/8 mile. They worked flawlessly in my small block. They're rated for 7,500+ rpms. The only reason I'm selling is because I've switched to a solid roller setup.
Cost new was $1,300. I'll sell them for $700 shipped anywhere in the lower 48 States.
Venmo and PayPal Friends and Family are okay.
Located in Central Oregon if you'd like to come take a look at them
