• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

70 RR Driveshaft Rear U-Joint Clamp Bolt Question

soundhd

Well-Known Member
Local time
8:25 AM
Joined
Oct 7, 2012
Messages
668
Reaction score
173
Location
Ann Arbor Michigan
Pulled the driveshaft off my 70 rr to get it checked out (balance, etc...) anyway noticed that the 4 small bolts that hold the clamp in place had different head sizes..two where 3/8" and two were 7/16". Which one is it supposed to be?

thanks
 
the 4 i pulled off my 68 charger were 3/8" dont know if this helps though
 
Thanks guys......that's what I thought.......the two 7/16 bolt heads gave almost no room for a socket or a box wrench to fit over them

thanks again
 
Auto Transport Service
Back
Top