71 super or charger R/T hood blackout dimesnsions?

[Diesel1276]

Can someone on here measure the hood blackout on their 71 Superbee or Charger R/T? My car is in the painters shop and I dont know the size offhand. Just a rough size that would encompass the decal. Thanks members.

 

[Arlo Price]

Lem'me know if you still need those measurements

 

[Diesel1276]

Yes I do. If you have them, I’ll take them. Thank You.

 

[71dodgechargerrt]

If Arlo can't get them, I should be able to later today.

 

[Diesel1276]

Ok. Thank You!

 

[71dodgechargerrt]

I can get it tomorrow, just looked at my pictures and they did not turn out well. Blurry.
I will go back out Sunday and reshoot. Aprox 48" x 24" but I want to show you on the
measure tape to be accurate.

 

[71dodgechargerrt]

Ok here is what I have. I can't get picture off my phone to site.
My tech support wife is away.
Top of hood center to the top of the blackout decal is14 1/2".
Top of decal to bottom is 48".
Center of hood bottom up to decal bottom is 5 1/2".
The its 23 1/2 at the most wide part of the decal at the top side.
Sorry the pic's didn't work. Let me know if anything more needed.
Don't forget there is a pin stripe decal that goes around the decal
which is not included in these measurements.
Tom

 

[Diesel1276]

Ok here is what I have. I can't get picture off my phone to site.
My tech support wife is away.
Top of hood center to the top of the blackout decal is14 1/2".
Top of decal to bottom is 48".
Center of hood bottom up to decal bottom is 5 1/2".
The its 23 1/2 at the most wide part of the decal at the top side.
Sorry the pic's didn't work. Let me know if anything more needed.
Don't forget there is a pin stripe decal that goes around the decal
which is not included in these measurements.
Tom

Thank you!