• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

960 heads - is there a left and Right?

wwheel

FBBO Gold Member
FBBO Gold Member
Local time
1:11 PM
Joined
Aug 10, 2020
Messages
217
Reaction score
142
Location
Dallas, TX
Trying to determine if there is a left and right. Attached picture shows "R" along with a casting number. The two heads we have look identical.

Thanks!

906 head.jpg
 
They are the same and swapable. You could look for witness marks as to which one had the alternator bolted to it ( passenger side)
 
The R is a casting digit, not a side designation.

They have all different letters on them.
 
Great and thanks. The threaded hole for the alternator on one head is buggered up. Was hoping to switch sides. Engine is being rebuilt, so no issue with that.
 
The head oils the rockers through the rear hole only. When you switch sides then the front holes that were never used are used and you need to make sure they are clean and clear.

Your photo shows the oil hole. Don't rely on your machine shop to do this, they may not.
 
Oh wow didn't know that. Thanks for the heads up. Luckily the heads were vatted and cleaned out. Both holes are clean and open.
 
Back
Top