• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

a-833

erk_f-100

Member
Local time
10:50 AM
Joined
Jan 9, 2009
Messages
5
Reaction score
0
Location
Saetre, Norway
I'm converting my 2.47 to a 2.66 and wondered if anyone has a 21 spline input shaft with 24 teeth for sale. I have the imput shaft, 2nd and 3rd gear and gear cluster for the 2.47 (and an A body tail and output shaft )left over and for sale if I get a usable imput shaft , but I live in Norway so shipping back to the States would be expensive
 
Hey Erik. You shoulda mentioned you needed an input shaft when we got together on the output shaft. I have several 23 spline shafts (there were only 18 and 23 spline). I've never counted the teeth on them though.
 
I have to proof read my enties better. Of course I mean 23 spline. The input shaft from before 1970 had 24 teeth while the 71-74 had 25 teeth. I need the early type with 24 teeth
 
Auto Transport Service
Back
Top