64 Post
Well-Known Member
Contact seller
I’m cleaning out my storage unit by the end of the month and I’ll be adding parts to this list as I go. 64/65 Ply and 64 Dodge B bodies only. Western, rust free parts. Pics available when I can take them.
Parts located in Balto, MD. 21219. Delivery assistance possible.
1 Pr. ’65 Ply inner fenders still attached to frame rails; shock towers included for 990 inversion. $200 Too heavy to ship unless the rails are cut off.
4 - ’64 Ply hoods; bare, some with trim and latches. $150-$200 each. No shipping.
1 pr. 65 Ply fenders, trim holes welded; little mud near headlight, very straight otherwise. In primer. Suitable for Bel I car. $550
2 pr. 64 Dodge fenders. 1 pr. with trim, needs an hour of dolly work; 1 pr. bare. $550 and $450, respectively.
1 - ’64/’65 Ply pass. side lower quarter patch. OE, removed from ’65 car. MINT $125 SALE PENDING
1 set(4) of ’64 Dodge 330 doors from a 4 door. 100% complete and rust free from a CA car. Straight, even the paint still shines. Ready to bolt on w/locks and matching keys. Perfect if doing a ’64-’65 B wagon project (the reason I was saving them; never found the “right" car) $400
2 - ’64 Ply deck lids; latches no locks. One with “PLYMOUTH” trim piece $100-$150
1 - 64 Dodge deck lid w/lock and matching key. EXC Cond. $150
1 pr. ’65 Ply fender splash shields. Rear $75
Parts located in Balto, MD. 21219. Delivery assistance possible.
1 Pr. ’65 Ply inner fenders still attached to frame rails; shock towers included for 990 inversion. $200 Too heavy to ship unless the rails are cut off.
4 - ’64 Ply hoods; bare, some with trim and latches. $150-$200 each. No shipping.
1 pr. 65 Ply fenders, trim holes welded; little mud near headlight, very straight otherwise. In primer. Suitable for Bel I car. $550
2 pr. 64 Dodge fenders. 1 pr. with trim, needs an hour of dolly work; 1 pr. bare. $550 and $450, respectively.
1 - ’64/’65 Ply pass. side lower quarter patch. OE, removed from ’65 car. MINT $125 SALE PENDING
1 set(4) of ’64 Dodge 330 doors from a 4 door. 100% complete and rust free from a CA car. Straight, even the paint still shines. Ready to bolt on w/locks and matching keys. Perfect if doing a ’64-’65 B wagon project (the reason I was saving them; never found the “right" car) $400
2 - ’64 Ply deck lids; latches no locks. One with “PLYMOUTH” trim piece $100-$150
1 - 64 Dodge deck lid w/lock and matching key. EXC Cond. $150
1 pr. ’65 Ply fender splash shields. Rear $75
Last edited: