• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

bolt pattern power brake booster

mopar440bbody

Active Member
Local time
9:05 AM
Joined
Jul 28, 2016
Messages
43
Reaction score
15
Location
louisiana
hey i need to order a replacement booster i would like to make sure i get correct one. should the firewall bolt pattern be the same master cylinder. 3 3/8 x 3 3/8. i my can measure it from inside but its very thigh and awkward . i think i have a 7 inch dual booster from speedway motors . was on car when purchased. thanks
 
hey i need to order a replacement booster i would like to make sure i get correct one. should the firewall bolt pattern be the same master cylinder. 3 3/8 x 3 3/8. i my can measure it from inside but its very thigh and awkward . i think i have a 7 inch dual booster from speedway motors . was on car when purchased. thanks
Hi, mopar440bbody,
Did you get your answer?
 
Auto Transport Service
Back
Top