Bump Stops

[Thunderlugs]

Seems my Upper control arm Rubber bump stops continue to fail at a miserable rate, on both my R/T, and Belvedere. Squish ,crack, fall apart! Am I alone here. Guess it's time for poly.
Any recommendations?
Sick of buying Junk, for such a simple part.

 

[Tony Tee]

Could be that your front suspension is lower than stock height and hits the bump stops more often?

 

[Thunderlugs]

Could be that your front suspension is lower than stock height and hits the bump stops more often?

Too much lift use. Suspension hanging too often.

 

[747mopar]

Mines lowered 2" and has poly, no problems.

 

[Thunderlugs]

Mines lowered 2" and has poly, no problems.

Poly is what I need. You get these old Dried up rubber relics from the auto parts stores, and they are older than you realize.

 

[Thunderlugs]

Could be that your front suspension is lower than stock height and hits the bump stops more often?

But if the car was lower, then , the UCA would be moving up and away from the stop, not closer. When the suspension hangs down, then it rests on the stops. I need to get some poly bushings to handle the job. This particular car is stored in the air often.