Can you provide pictures of the door latch area?

[TT from NH]

I am repairing the metal on the doors from my 68 Coronet and BOTH latch areas have been hacked pretty bad. I want to repair this area but I don't know what the original looks like. Can anyone send me pictures of their latch area? Here's what I'm dealing with:
Driver door:

Passenger door:

Yikes! (and thanks)

 

[eldubb440]

Holy smokes ...... I might have something here I can send you

 

[66ChargerHI-PO]

@Chongo 68 ?

 

[threewood]

 

[Chongo 68]

@Chongo 68 ?

Hope this helps!

 

[TT from NH]

Holy smokes ...... I might have something here I can send you

View attachment 2032642

FINALLY you get to help me again, @eldubb440 ! Thanks, this helps alot!

 

[TT from NH]

View attachment 2032695

Oooooooooooo! So pretty! This helps me see that the area is not countersunk! Thanks!

 

[TT from NH]

Hope this helps!
View attachment 2032707
View attachment 2032708
View attachment 2032706

Super! Thanks @Chongo 68 !

 

[Mopar Hunter]

There’s a company that sells replacement reinforce/patches.

 

[Mopar Hunter]

 

[Bird 426]

Mega Parts has the repair patch. Door latch repair patch.

 

[1KoolBee]

Virgin door latch

 

[eldubb440]

I was unaware of the repair pieces..... sweet

 

[TT from NH]

View attachment 2032731

Thanks, @Mopar Hunter . It was pretty easy to fabricate a pair for my doors but I would have considered going this route had I known

 

[TT from NH]

Virgin door latch

View attachment 2032967

Thanks @1KoolBee. However, I'm working on the door side (the rotor side), not the body side.

 

[TT from NH]

Okay, now I'm finding myself in need of the three screws that screw through the door plate into the door rotor mechanism. The mechanism has threaded holes that accept the screws but I tried 10-24, 10-32, and 1/4-24. None quite fit. Nor can I find a site that sells them. Can anyone tell me what size screws these are?

Thanks!

Update: I think I found the screws on eBay: https://www.ebay.com/itm/204881812661

 

[1KoolBee]

Thanks @1KoolBee. However, I'm working on the door side (the rotor side), not the body side.

I can get that too. Dirty but totally original.