Control arm bushing tool

[joe smith]

Can anyone recommend a bushing remove/install tool ??
Or should I just have them done somewhere?

 

[rbkt65]

i use a ball joint press. rent 1 at az or oboys or aap.

 

[Don Frelier]

Upper or lower?

 

[hunt2elk]

Mancini sells a decent front suspension tool kit if you are looking to buy.

 

[zyzzyx]

Auto Zone lets you borrow fo Free!

 

[joe smith]

Its an 83 mustang, lower control arm. My ball joint removal tool will not work on the bushings. When I check online with AZ or O'Reillys about their rentals, its non compatible with my car..

 

[493 Mike]

Have you tried a socket large enough to fit over the bushing and a piece of all thread rod with washers? Draw the bushing into the socket. Grease up the rod threads.
Mike

 

[joe smith]

Have you tried a socket large enough to fit over the bushing and a piece of all thread rod with washers? Draw the bushing into the socket. Grease up the rod threads

Same concept as the "kit" attached but alot cheaper... I will give this a try
Thank you