Brewzer67
Well-Known Member
- Local time
- 10:58 AM
- Joined
- Dec 20, 2015
- Messages
- 524
- Reaction score
- 537
- Location
- Menomonee Falls, WI
Ross Custom 440/526 Stroker Pistons For Sale -
Shipping from Menomonee Falls, WI
Price: $700 + shipping.
Payment Methods Accepted: Cash, Zelle, Venmo, or PayPal. (If using PayPal for business please add 2% to cover fees.)
Pistons are Custom Ross (2618 alloy) with 23.8cc dish. Dish is custom cut and matches the combustion chamber for Trick Flow 240/270 heads to maximize quench potential so they run great with 89/91/93 ethanol. They have a compression height of 1.416, which with a 7.100 rod in my block gave me a compression ratio of 10.65:1. They are for a 4.375" bore with .990 pins. Pins and double spiral locks are also included. Pistons are relatively light, only weighing 553g each but still don't need an oil ring support. They were made for 1/16, 1/16, 3/16 ring grooves. Recommended piston to wall clearance is .005 but they would also work great in a slightly larger bore (4.380) with Line2line APC coating on them ($300 to coat the set). They have a few scuff marks on the sides but nothing serious. They have only seen street miles as the car has been stuck at the body shop for the last 5 years. Selling because I am moving to an aftermarket block and had to change direction. I was unfortunately forced to step up to a Callies 4.500" bore block due to lack of availability of smaller bore version. Upside is more cubes!
Message me with any questions.
Thanks,
Bob
Shipping from Menomonee Falls, WI
Price: $700 + shipping.
Payment Methods Accepted: Cash, Zelle, Venmo, or PayPal. (If using PayPal for business please add 2% to cover fees.)
Pistons are Custom Ross (2618 alloy) with 23.8cc dish. Dish is custom cut and matches the combustion chamber for Trick Flow 240/270 heads to maximize quench potential so they run great with 89/91/93 ethanol. They have a compression height of 1.416, which with a 7.100 rod in my block gave me a compression ratio of 10.65:1. They are for a 4.375" bore with .990 pins. Pins and double spiral locks are also included. Pistons are relatively light, only weighing 553g each but still don't need an oil ring support. They were made for 1/16, 1/16, 3/16 ring grooves. Recommended piston to wall clearance is .005 but they would also work great in a slightly larger bore (4.380) with Line2line APC coating on them ($300 to coat the set). They have a few scuff marks on the sides but nothing serious. They have only seen street miles as the car has been stuck at the body shop for the last 5 years. Selling because I am moving to an aftermarket block and had to change direction. I was unfortunately forced to step up to a Callies 4.500" bore block due to lack of availability of smaller bore version. Upside is more cubes!
Message me with any questions.
Thanks,
Bob
