• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

dart master cylinder

Dan T

Member
Local time
7:32 PM
Joined
Feb 17, 2024
Messages
8
Reaction score
4
Location
Southern California
question: I am putting new brake lines and all parts on my 62 dart, I am using 3/16 lines for rear and front (rear drum/front disc) I would like a good recommendation for the master cylinder (will not be using booster)

thanks in advance
 
I like the aluminum, 2 bolt Mopar style. You will need a adapter plate (make one) and may need a adjustable push rod. Just use a adjustable proportioning valve to tune the bias pressures.
Mike
 
I like the aluminum, 2 bolt Mopar style. You will need a adapter plate (make one) and may need a adjustable push rod. Just use a adjustable proportioning valve to tune the bias pressures.
Mike
Thanks for the information, I will get it put together
 
Did it on my 62 with these parts:

Adjustable Proportioning Valve
Mopar Aluminum Master Cylinder Kit

20220606_220102.jpg
 
Auto Transport Service
Back
Top