irydebikes
Member
Looking for a pair of spindles to mount 11x3" drums to a 65 Belvedere II.
FOUND Drum brake spindles
- Thread starter irydebikes
- Start date
- Status
Are the spindles different for 10” brakes? I may have a pair of them.
- Local time
- 5:17 AM
- Joined
- Jul 31, 2011
- Messages
- 8,981
- Reaction score
- 4,091
- Location
- Western Colorado High Desert
10" and 11" use the same spindle.
I also have several.
I also have several.
Last edited:
irydebikes
Member
So, I am not sure what car the brakes I have are off of. A fellow Mopar nut friend gave them to me. The spacing on the backing plates (between upper and lower bolts) is 2 7/8" on the brakes but my spindles are 2 3/8". Any ideas? thanks guys!!!
- Local time
- 5:17 AM
- Joined
- Jul 31, 2011
- Messages
- 8,981
- Reaction score
- 4,091
- Location
- Western Colorado High Desert
I'm not sure. The 70-71 FPM shows the same spindle for non-disc brakes. Do you have a pic of the brakes?
irydebikes
Member
I have pics but can't get them to upload... :/
Also tryin to get ahold of my buddy who gave them to me to see if he knows what the heck they're off of!
Also tryin to get ahold of my buddy who gave them to me to see if he knows what the heck they're off of!
- Status
Similar threads
- Locked
