• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Engine bay

plowman

Well-Known Member
Local time
6:15 AM
Joined
Jul 17, 2008
Messages
569
Reaction score
426
Location
michigan
448CFC62-ADBE-4E54-8F3F-8E753DC07005.jpeg
Checking out this engine bay that belongs to someone on this board
 
Last edited:
probably "well executed":eek:
 
I like it. That's a nice finish on the wiper motor. That much engine paint overspray on the negative ground wire was typical from the factory?
 
Yes I believe that over-spray on the ground is normal; I am not a resto guy but I have seen it plenty of times talking about how to do it "right".
 
I like it. That's a nice finish on the wiper motor. That much engine paint overspray on the negative ground wire was typical from the factory?
Yes, most of the cable inevitably got hit with paint along with the firewall ground cable.
 
Auto Transport Service
Back
Top