Ford Bronco has the same Release bearing as a Dodge 18 Spline 4 Speed?

Road Grabber

Well-Known Member
Local time
9:00 PM
Joined
Apr 14, 2020
Messages
497
Reaction score
88
Location
Sarasota Florida
I have had some trouble finding a decent throw out bearing (looking for a BCA NB1625 or National bearing replacement- no China crap) for my 18 spline 4 speed.
After searching the internet I see that there is a possibility that the Ford Bronco used the same bearing 1.625 bore?

I see a bearing listed for 82-90 Ford, AMC, Jeep number 1625

If the bearing is the same I can just press it on.

Thank you
 

hunt2elk

FBBO Gold Member
FBBO Gold Member
Local time
8:00 PM
Joined
Jul 15, 2009
Messages
9,483
Reaction score
9,565
Location
WI
I have bought them from Jamie Passon in the past. It's been a couple of years, but they were less money than the ebay listing that Jerry posted.
 

Road Grabber

Well-Known Member
Local time
9:00 PM
Joined
Apr 14, 2020
Messages
497
Reaction score
88
Location
Sarasota Florida
I have bought them from Jamie Passon in the past. It's been a couple of years, but they were less money than the ebay listing that Jerry posted.

No doubt but I just need the bearing. You can save a lot of money just replacing the bearing. It comes right off and is easy the push back on.
 

hunt2elk

FBBO Gold Member
FBBO Gold Member
Local time
8:00 PM
Joined
Jul 15, 2009
Messages
9,483
Reaction score
9,565
Location
WI
No doubt but I just need the bearing. You can save a lot of money just replacing the bearing. It comes right off and is easy the push back on.
Gotcha, I misread and thought you were looking for the whole thing.
 
Top