FYI: Good Article On The New Edelbrock Aluminum Gen 2 Hemi Heads In Mopar Muscle Mag.

[soundhd]

For any of you that might be interested the November issue of Mopar Muscle magazine has a pretty in depth write up on the new Edelbrock Aluminum Gen II Hemi Victor Jr. heads. Got a chance to get a close up look at them at the DPC show in Lake Orion Mi. a few weeks ago and they looked pretty nice (from what my "untrained" eyes could see). Seems like a great way to go if one is looking for a set of street aluminum heads for a Gen II hemi.

 

[super-bee_ski]

I wish they were available when I bought my Hansen Stage V heads, 2004.
I would have bought them, hands down.

Plus, physically, unlike the Hansen Stage Vs, the Edelbrocks are identical to the factory castings.

Now, if we can onlyy get Edelbrock to make a AMC/Jeep 235/258 in-line 6-cylinder head!

 

[Photon440]

I wish they were available when I bought my Hansen Stage V heads, 2004.
I would have bought them, hands down.

Plus, physically, unlike the Hansen Stage Vs, the Edelbrocks are identical to the factory castings.

Now, if we can onlyy get Edelbrock to make a AMC/Jeep 235/258 in-line 6-cylinder head!

This aluminum 4.0 head will also fit the 4.2 (258) if you swap manifolds:
http://www.hesco.us/shop.asp?action=details&inventoryID=44115#.U_ZaO2O1t8E