• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Has anyone else seen seats such as these from a Mopar vehicle?

Status
Not open for further replies.

firstgencharger

Well-Known Member
Local time
6:55 PM
Joined
Dec 25, 2012
Messages
68
Reaction score
2
Location
dearborn, mi
Feedback: 1 / 0 / 0
I have these seats from my 1967 charger. Back seats have the same pattern and grain. I posted in the 1966/67 charger forum, and only one person thought that may be from an A-body. The seat bases fit in the charger very well. Although I would like to get the correct pattern for my car, these seem to be breathable fabric.

I may have to go to the A-body site!

I am also looking for a chrome trim piece for one of the seat backs. It is 17-5/8" long, has a 1/4" wide channel, and is 5/16" across.
 

Attachments

  • 100_3813.jpg
    100_3813.jpg
    46.2 KB · Views: 428
  • 100_3807.jpg
    100_3807.jpg
    59 KB · Views: 420
  • 100_3804.jpg
    100_3804.jpg
    43.2 KB · Views: 431
  • 100_3805.jpg
    100_3805.jpg
    34.1 KB · Views: 439
They look like 67 seats, gtx specifically. The gtx covers have the 1.2"- 2" strip in the middle. Someone just recovered them with different material.
 
I'd agree, they look VERY similar to the 67 GTX and satellite buckets, except, in your pics are the center stripes raised?
Because the 67 Satty and GTX stripes were more recessed into the seat.
 
Looks like they were recovered by someone that does fleet type seat covers.

Whoever did the bus seats on hundreds of used buses back when I was a kid did work like that, same material, too.

I'll say it again- I've never seen perforated material used on any mid 60's to mid 70's Mopars from the factory.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top