• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Hughes Lifters

sabre67

Well-Known Member
Local time
10:00 PM
Joined
Apr 26, 2018
Messages
291
Reaction score
237
Location
B.C Canada
Would anyone know who supplies Hughes with there hydraulic roller lifters? Who makes them? Thanks
 
Would anyone know who supplies Hughes with there hydraulic roller lifters? Who makes them? Thanks
Honestly it may depend on the part number, as i'm sure you know a lot of lifters are re branded. My Howard's # 91774 are most likely Gaterman lifters. I'm sure their not Comp or Morel street lifters. I used these on a 493 and they held tough until 6300 when they just started to nose over. They were recommended to me by Hughes. Probably the best ones are the Morel hi rpm lifters but their also $1100 bucks. If the #91774 don't cut it i will put in the hi rpm's, if they don't cut it i quit and i'll go solid. Car is not on the road yet so too early to tell.
 
Auto Transport Service
Back
Top