Stroked438
Active Member
I am looking for a Holley Street Dominator intake for 440. May even take a Edelbrock Torquer 2 intake but would rather have the Street Dominator. Let me know what you have and a price.
SOLD Intake wanted
- Thread starter Stroked438
- Start date
- Status
not so famous bob
Well-Known Member
not so famous bob
Well-Known Member
got a polished weiand single plane , flows around 320 ish cfm on all runners , very close spread , flow sheet with it .
will flow with or better than any ported stock head , and a lot of alum heads .I probably should be running this on my 505 but after trying a bunch of intakes and reworking the throttle linkage each time , am too lazy to do it again. It is shorter than the victor I`m running , and flows almost as good , car ran as good ''seat of the pants'' with this , as the victor, and better clearance for an air filter . !
will flow with or better than any ported stock head , and a lot of alum heads .I probably should be running this on my 505 but after trying a bunch of intakes and reworking the throttle linkage each time , am too lazy to do it again. It is shorter than the victor I`m running , and flows almost as good , car ran as good ''seat of the pants'' with this , as the victor, and better clearance for an air filter . !
Stroked438
Active Member
It looks good but I don't think it will fit under my stock hood.
not so famous bob
Well-Known Member
Daves69
Well-Known Member
Mopar Man 73
Well-Known Member
Stroked438
Active Member
I found one. I actually bought the one Mopar Man 73 has. I forgot to post it.
You need to mark the ad "sold" just below the title above.
- Status
Similar threads
