• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

KH 80012 rebuild

70 SUPERBIRD

Well-Known Member
Local time
10:16 AM
Joined
Feb 9, 2011
Messages
337
Reaction score
471
Location
WOODBRIDGE,VA
Good Afternoon all
Planning on rebuilding my wide mouth calipers for my Superbird. The question I have is would be the best seal kit to use when I rebuild them. Going to sandblast them before rebuilding them.
Any information would be really appreciated
 
I would go buy a pair from your local Autozone, Advanced Auto or Rockauto and remove the parts off the new units and use them in yours. That's what I did, I have the large mouth calipers on my 70 as well. I think each rebuilt caliper was about 30 bucks a piece. Although the castings changed a bit, but the parts are interchangeable for many years.

1970 DODGE CORONET 7.2L 440cid V8 Caliper | Shop Now at RockAuto
 
Evaporust for th cleanup is better than sand.
 
Don’t know if I can find them in the = NEW = N.O.S. =
= U.S.A. Made = world === was never asked to investigate……

What I keep in stock is for all the Four (4) Piston Caliper Caliper Kits for :
1966 - 1968 “ C “ Body BUDD Caliper Kits
1966 - 1969 “ B “ Body Kelsey - Hayes / BENDIX Caliper Kits , and
1965 - 1972 “ A “ Body Kelsey - Hayes Caliper Kits

Those are what I traditionally/ regularly get the calls on …..
 
I just looked on rock auto , the queen of reselling Chineseum garbage , and —-
=== There is N O LISTING at all ===
For Caliper Kits or Caliper Pistons……
( Look for yourself ….. )

Craig…..
 
I looked up a 426 HEMI — and they show nothing….

Of course , current Chineseum can’t officially be 2 3/4 “ —
Because they use the metric system —- it is rubber , so it can be “ close “ ….

I will see if I can get Walter “ U S A made “ where it won’t be “ close “ , it will be “ Perfect “ …..
( If I can find them …. )

Craig….
 
I looked up a 426 HEMI — and they show nothing….

Of course , current Chineseum can’t officially be 2 3/4 “ —
Because they use the metric system —- it is rubber , so it can be “ close “ ….

I will see if I can get Walter “ U S A made “ where it won’t be “ close “ , it will be “ Perfect “ …..
( If I can find them …. )

Craig….
Thank you Craig
 
With Raybestos’ doors shuttered by the F B I in the First Brands scandal / bankruptcy / predicament —-
the Chineseum WK520 Raybestos can not be supplied , presently…..
 
Back
Top