Anyone used the Hughes flat tappet lifters? Thoughts?
Lifters
- Thread starter Jim Milburn
- Start date
John Milner
Well-Known Member
I used some back in 2019. I believe they were Johnson's lifters, or at least were at that time. They worked fine and are still working fine for me.
I have a set for 8 years or so with no issues.
Mike
Mike
Geoff 2
Well-Known Member
Read about the lifter failures in the post about break in, this category.
If you want reliable FT lifters, have stock or after market lifters that are at least 25+ yrs old, re-faced.
If you want reliable FT lifters, have stock or after market lifters that are at least 25+ yrs old, re-faced.
Mopar Hunter
Well-Known Member
After my engine break-in - I find this.
I posted this in the my project section. I had my engine broken in and dyno'd earlier this year (May). I decided to re-gasket my 360 engine. So I pull off the oil pan and I find this in the sump.....:mad: The stuff didn't feel gritty when I rubbed it between my fingertips. I figure it's a...
www.forbbodiesonly.com
Similar threads
