• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOUND Manual Master Cylinder Boot Retainer

Status
Not open for further replies.

69L48Z27

Well-Known Member
Local time
12:39 PM
Joined
Nov 19, 2015
Messages
3,853
Reaction score
4,203
Location
York, Pa
Feedback: 7 / 0 / 0
I think that’s what it’s called.

Looking for the plate that screws to the rear of a manual brake master cylinder and then holds the rod boot in place. Picture of an example below.

Prefer PayPal for a quick and easy transaction.

Let me know whatcha have.
TIA!
ADFB9393-4802-42CB-B7FE-F2AC5C127BA3.jpeg
 
I think that’s what it’s called.

Looking for the plate that screws to the rear of a manual brake master cylinder and then holds the rod boot in place. Picture of an example below.

Prefer PayPal for a quick and easy transaction.

Let me know whatcha have.
TIA!
View attachment 850329

Is the center to center on the holes 2"? If so I have a new one with boot. You can have it if you pay shipping.
Mike
 
Thank you very much. 2” plus a couple thousands. I’ll PM you.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top