Dibbons
Well-Known Member
- Local time
- 4:11 AM
- Joined
- Nov 29, 2014
- Messages
- 4,751
- Reaction score
- 5,459
- Location
- La Paz, B.C.S., Mexico
Would like the correct Nascar size motor for my project car that never was: 1972 Satellite/Superbird.
WTB Mopar 305 CID motor, short block, or crankshaft.
- Thread starter Dibbons
- Start date
- Status
- Local time
- 3:11 AM
- Joined
- Mar 14, 2012
- Messages
- 16,969
- Reaction score
- 28,061
- Location
- Surrey, B.C. Canada
All you'd really need would be the crank. They fit a 340 block. You just missed one (by a couple of years) http://www.ebay.com/itm/340-Mopar-De-stroker-Crankshaft-Forged-Steel-/261028254805
If you could get a custom 2.96 stroke crank you'd still be looking for the custom rods and pistons for it as well.
The 5 liter Trans-Am engine used in the Cuda's and Challengers for T/A racing used a lot of custom parts. There's some discussion here http://www.forabodiesonly.com/mopar/showthread.php?t=279054
If you could get a custom 2.96 stroke crank you'd still be looking for the custom rods and pistons for it as well.
The 5 liter Trans-Am engine used in the Cuda's and Challengers for T/A racing used a lot of custom parts. There's some discussion here http://www.forabodiesonly.com/mopar/showthread.php?t=279054
- Status
Similar threads
