skymynx
Well-Known Member
I have a couple of things from various projects. I have a set of 318 swirl port heads and 360 heads. Both sets need to be rebuilt. Have factory valves, valve springs and rockers. Have an 2 barrel intake manifold along with a factory carb. Was told it was off a 68 barracuda and freshly rebuilt. I have not ever put it on anything since I got it. Have two factory 904 transmission inspection plates that could be repainted and reused. Have an engine kit rebuild gasket set for a 318-360 motor. The only thing I know is missing is the valve cover gaskets. It's a FEL-PRO part #260-1152. Lastly I have an air conditioner compressor from a 1972 charger. Couldn't really say if it works as I simply took it off the car and put it aside.
I used this website to try to verify the intake manifold.
http://www.cuda-challenger.com/cc/index.php?topic=2776.0
318 swirl port heads casting number 4323302 - $40
360 factory heads casting number 4323345 - $40
318 2 barrel intake and carb - $40
904 inspection plate - $10 a cover
Fel Pro Gasket Kit - $20
Air condition compressor - $25
Name is Mike. Can be reached at (sorry, per forum rules, no phone numbers allowed in ads) (been getting spam bot text lately). Will ship if buyer pays for shipping. Located in Connecticut for locals.
I used this website to try to verify the intake manifold.
http://www.cuda-challenger.com/cc/index.php?topic=2776.0
318 swirl port heads casting number 4323302 - $40
360 factory heads casting number 4323345 - $40
318 2 barrel intake and carb - $40
904 inspection plate - $10 a cover
Fel Pro Gasket Kit - $20
Air condition compressor - $25
Name is Mike. Can be reached at (sorry, per forum rules, no phone numbers allowed in ads) (been getting spam bot text lately). Will ship if buyer pays for shipping. Located in Connecticut for locals.
Last edited by a moderator:
