• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Muffler inlet/outlet spacing

Aarons Air

Well-Known Member
Local time
10:26 PM
Joined
Dec 8, 2016
Messages
2,397
Reaction score
3,614
Location
Dayton ohio
I have a 68 coronet. I have installed headers, and plan to run 2.5 inch exhaust. While looking at oval mufflers i notice they can be ordered with the inlets and outlets either centered or offset. Is there one particular configuration that works best with pipe routing on these cars ?
 
B body Mopars (and most all other Mopars) have inlet offset and center outlet to clear the driveshaft in the inlet side and for tail pipe location on the outlet.
 
Last edited:
B body Mopars (and most all others) have inlet offset and center outlet to clear the driveshaft in the inlet side and for tail pipe location on the outlet.
Exactly what i needed to know. Thank you !
 
68 Coronet one of my all time favorites. Hope yours has a good trunk lid !
 
Auto Transport Service
Back
Top