New Fast Ratio Steering Linkage Kit $239!!!!!!!!

Performance Suspension Technology

  1. PST

    PST FBBO Vendor FBBO Sponsor

    Messages:
    612
    Likes Received:
    546
    Joined:
    Sep 27, 2010
    Location:
    NJ
    Local Time:
    1:22 AM
    Mopar Fast Ratio Steering Linkage Kit
    Upgrade your steering setup today with PST’s brand NEW Fast Ratio Steering Linkage Kit. PST had you Mopar Fans in mind when designing this kit. It will enhance the steering capabilities of your A,B or E Mopars. Our kit includes our Fast Ratio Pitman Arm, Idler Arm and the more robust 11/16” inner and outer tie rods ends. To tie the inner and outer tie rods together we have included PST’s solid Adjusting Sleeves. This kit will give you the best of both worlds, the steering ratio of a high performance AAR Mopar and the Heavy Duty steering components seen on the land yachts of the Mopar C bodies.
    • The Fast ratio gives you quicker steering response.
    • Solid Tie Rod Adjusting Sleeves. Machined from a solid block of hex steel. These reduce/eliminate the deflection seen in the factory sleeves
    • Better Handling
    • 11/16” solid adjusting sleeves that are normally found on the larger C bodies are now available for your A, B &E body Mopars
    • Less turns of the steering wheel to get the wheels to turn a given distance.
    • A plus for parking by having the reduced ratio.
    • Works with Manual or Power Steering cars

    PST, 1-(800)-247-2288, WWW.P-S-T.COM
    Application:
    1973-1976 A-Body Cars (Dodge Dart Sport, Dodge Dart, Plymouth Valiant, Plymouth Scamp, Plymouth Duster)
    1966-73 B-Body Cars (Dodge Charger, Dodge Coronet, Dodge Super Bee, Plymouth GTX, Plymouth Roadrunner, Plymouth Satelite)
    1970-1974 E-Body Cars (Cuda, Challenger)
    Note: May not clear some aftermarket headers
     
  2. Malicious

    Malicious Well-Known Member

    Messages:
    782
    Likes Received:
    193
    Joined:
    Feb 12, 2012
    Location:
    Melbourne
    Local Time:
    3:22 PM
    Are you able advise which headers this kit wont work with?

    I've got a set of Hooker 1 7/8" headers for a 440 in a 68 b-body. Will these clear or am I going to have clearance problems?
     
  3. PST

    PST FBBO Vendor FBBO Sponsor

    Messages:
    612
    Likes Received:
    546
    Joined:
    Sep 27, 2010
    Location:
    NJ
    Local Time:
    1:22 AM
    I sorry these will not clear with your set up they only work with the small block 1 5/8" from Hooker.

    Thanks
    James From
    PST Marketing
    1-800-247-2288
    Ext 316
    jfrom@p-s-t.com
     
  4. PST

    PST FBBO Vendor FBBO Sponsor

    Messages:
    612
    Likes Received:
    546
    Joined:
    Sep 27, 2010
    Location:
    NJ
    Local Time:
    1:22 AM
    QuickRatioKIT.jpg

    $239 is a great buy when you consider buying just the pitman and idler arm alone. DON'T WAIT ON THIS PRICE
     
    • Like Like x 1
    • MoparMikey

      MoparMikey Well-Known Member

      Messages:
      292
      Likes Received:
      36
      Joined:
      Dec 12, 2011
      Location:
      SoCal
      Local Time:
      10:22 PM
      Doesn't the "fast ratio" also increase the effort needed to turn the wheel?
       
    • Gpuller

      Gpuller Well-Known Member

      Messages:
      2,558
      Likes Received:
      1385
      Joined:
      Jun 16, 2010
      Location:
      Minnesota
      Local Time:
      12:22 AM
      That idler shown in the pic wont work on a 66 B-body, do you offer the correct one?
       
    • PST

      PST FBBO Vendor FBBO Sponsor

      Messages:
      612
      Likes Received:
      546
      Joined:
      Sep 27, 2010
      Location:
      NJ
      Local Time:
      1:22 AM
      I believe that arm should work for your vehicle. What part of it are you questioning the clocking ?

      Thanks
      James From
      PST Marketing
      1-800-247-2288
       
    • PST

      PST FBBO Vendor FBBO Sponsor

      Messages:
      612
      Likes Received:
      546
      Joined:
      Sep 27, 2010
      Location:
      NJ
      Local Time:
      1:22 AM
      I need to make a correction here. This was my mistake in the listing. The idler arm will not work on the 66 B bodies but the pitman will work with your factory idler. So This listing will now be for 1967 -73 B Bodies. I apologize for the mistake.

      Thanks
      James From
      PST Marketing
      1-800-247-2288
      Ext 316
       
    • 65 Plymouth Satellite 426

      65 Plymouth Satellite 426 Well-Known Member

      Messages:
      1,337
      Likes Received:
      379
      Joined:
      Apr 6, 2012
      Location:
      York, Pennsylvania
      Local Time:
      12:22 AM
      Nothing For B-Bodied 62-65 Mopars Here?
       
    • PST

      PST FBBO Vendor FBBO Sponsor

      Messages:
      612
      Likes Received:
      546
      Joined:
      Sep 27, 2010
      Location:
      NJ
      Local Time:
      1:22 AM
      I'm sorry but not at this time.

      Thanks
      James From
      PST Marketing
       
    • 400Magnum

      400Magnum Well-Known Member

      Messages:
      64
      Likes Received:
      24
      Joined:
      May 9, 2011
      Location:
      Grand Ledge, MI
      Local Time:
      1:22 AM
      Does this kit provide the same steering ratio as the original Mopar fast-ratio arms for the T/A-AAR cars?

      Also, would this kit also work on later model B-bodies (like the Cordoba, Magnum, etc.)?
       
    • PST

      PST FBBO Vendor FBBO Sponsor

      Messages:
      612
      Likes Received:
      546
      Joined:
      Sep 27, 2010
      Location:
      NJ
      Local Time:
      1:22 AM
      It will give you the same ratio as the T/A and AAR but as for it fitting a later model b body I do not know. The applications above are the ones that I was given. I would need to check in to it further myself
      .

      Thanks
      James From
      PST Marketing
       
    • black bitch

      black bitch Member

      Messages:
      12
      Likes Received:
      0
      Joined:
      Oct 23, 2011
      Location:
      new tec
      Local Time:
      12:22 AM
      what about pitman arm holes ! there is big and small???
       
    • PST

      PST FBBO Vendor FBBO Sponsor

      Messages:
      612
      Likes Received:
      546
      Joined:
      Sep 27, 2010
      Location:
      NJ
      Local Time:
      1:22 AM
      The Pitman arm that we supply is the 1 1/8"

      Thanks
      James From
      PST Marketing
      1-800-247-2288
      Ext 316
       
    • Propwash

      Propwash Well-Known Member

      Messages:
      9,714
      Likes Received:
      4274
      Joined:
      Oct 29, 2009
      Location:
      Island of Misfit Toys
      Local Time:
      12:22 AM
      Guessing no, but will this kit work with TTI 2" Headers and an RB block in a '69 B-Body James?
       
    • PST

      PST FBBO Vendor FBBO Sponsor

      Messages:
      612
      Likes Received:
      546
      Joined:
      Sep 27, 2010
      Location:
      NJ
      Local Time:
      1:22 AM
      Sorry for the slow response propwash. I only got the notification now. As of right now the only headers this set up will work with that we know of is the following. ( It may work with others as well but these are the only ones that we have currently tested)

      Flo Tech, Hedman Big Block part #78030 & 78038 HD
      Hooker small block 1 5/8” comp. 1 ¾” comp #5208
      Mopar Performance Big Block 1 ¾”
      TTI Small Block I ¾” with slight dimple to tube.

      Thanks
      James From
      PST Marketing
      1-800-247-2288
      Ext 316
      jfrom@p-s-t.com
       
      • Like Like x 1
      • Thanks! Thanks! x 1
      • snakeoil24

        snakeoil24 FBBO Gold Member FBBO Gold Member

        Messages:
        4,557
        Likes Received:
        3541
        Joined:
        Jan 23, 2009
        Location:
        New Jersey The State of Tax Theives
        Local Time:
        1:22 AM
        Doesn't fast ratio risk quick steer issues? which can lead to unstable hi speed over steer issues?
         
      • Cranky

        Cranky Banned Staff Member FBBO Gold Member

        Messages:
        20,788
        Likes Received:
        17236
        Joined:
        Dec 4, 2009
        Location:
        Pasa-getdown-dena Texas
        Local Time:
        12:22 AM
        My only experience with the fast ratio setup was on a factory equipped 71 340 Cuda. They only came with power steering but to answer your question, yes, any time you increase the steering ratio, it will increase steering effort but with PS, it's not an issue.

        The 67 K frame should have the same mount setup as a 66 but it's been a long time since working on a 67. IIRC, the factory didn't change the idler mount until 68.

        The cars that came with the fast ratio setu also came with a faster steering box so the answer would be no but it will be better than a stock non-fast ratio setup.

        Unless the pitman arm is longer than the original setup, it won't be as fast.

        My factory setup didn't do any of that and I really liked it and never had any problems running well over 120...
         
      • Propwash

        Propwash Well-Known Member

        Messages:
        9,714
        Likes Received:
        4274
        Joined:
        Oct 29, 2009
        Location:
        Island of Misfit Toys
        Local Time:
        12:22 AM
        No sweat James. I appreciate the response either way. Makes a big impression when a vendor actually takes the time to respond to your questions. I appreciate it.

        Take Care
         
      • ayeayemate

        ayeayemate New Member

        Messages:
        2
        Likes Received:
        0
        Joined:
        Mar 22, 2018
        Location:
        Woodbridge, Virginia
        Local Time:
        1:22 AM
        James is this kit still available? Thanks Tim
         
      1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
        By continuing to use this site, you are consenting to our use of cookies.