SOLD NEW MOPAR CAMSHAFT & LIFTERS “509” $475.00 SHIPPED

[dodgeboy440]

NEW IN BOX

MOPAR PURPLE STRIPE CAM & LIFTERS

Factory Engineered P4120237. B/RB Engine
361-383-400-413-426-440
Cam & Tappet Package
SPECS: LIfT .509
Duration : 292
Overlap: 76
Centerline: 108

Shipped Lower 48 , $475.00
Will Ship International At Buyers Cost.
fyi : I just shipped a set of rods . They Cost
63& change . I expect this cam & lifters to be about a hundred …..it is what it is …..
FREE pickup Southern NV 89014.

New Old Stock From The 90’s.
GOOD STUFF

I’ve Used These 509 Cams before & they’re nothing to ignore, they work ! With a Fuel Injection setup this should rock someone’s world !

Cleaning out the closet so to speak .

Send me you’re favorite check , I’ll respond with a purchase agreement & upon clearance the tracking Intel for your shipment. Simple .

Questions : PM

Thanks

Mopar2ya

John

 

[67coronetman]

NEW IN BOX

MOPAR PURPLE STRIPE CAM & LIFTERS

Factory Engineered P4120237. B/RB Engine
361-383-400-413-426-440
Cam & Tappet Package
SPECS: LIfT .509
Duration : 292
Overlap: 76
Centerline: 108

Shipped Lower 48 , $475.00
Will Ship International At Buyers Cost.
fyi : I just shipped a set of rods . They Cost
63& change . I expect this cam & lifters to be about a hundred …..it is what it is …..
FREE pickup Southern NV 89014.

New Old Stock From The 90’s.
GOOD STUFF

I’ve Used These 509 Cams before & they’re nothing to ignore, they work ! With a Fuel Injection setup this should rock someone’s world !

Cleaning out the closet so to speak .

Send me you’re favorite check , I’ll respond with a purchase agreement & upon clearance the tracking Intel for your shipment. Simple .

Questions : PM

Thanks

Mopar2ya

John

View attachment 1230826 View attachment 1230827 View attachment 1230828 View attachment 1230829 View attachment 1230830 View attachment 1230831 View attachment 1230832 View attachment 1230834 View attachment 1230835

I wish I had the money I would so buy that cam from you in a heartbeat that is probably my favorite cam ever some people think it's a waste of time some think it's an old grind that ain't worth nothing but I got news for him you got the right stall the right gears and set up the right way that thing absolutely runs awesome..

 

[GTX 70]

Hi, if the kit is still available I'll take it. I tried sending a PM, showed (error ), not sure what's wrong. Try sending me a PM and we'll do the deal. Thanks, Abe

 

[ZR9B]

I had that cam in my 72 charger...3500 stall 8.5 to 1 comp. Headers mild port job and a 430 gear....12.5 all day at the track

 

[dodgeboy440]

Hi, if the kit is still available I'll take it. I tried sending a PM, showed (error ), not sure what's wrong. Try sending me a PM and we'll do the deal. Thanks, Abe

HELLO GTX!!!!!!!!!!

IT APPEARS TO WORK FINE OVER HERE.

I AM IN NEVADA USA 89014.

ARE YOU IN CANADA ??????????????????????

THAT CHANGES THE WHOLE DISCUSSION!!!

NOW YOU PAY FOR INTERNATIONAL SHIPPING!!

I DO NOT CLAIM TO BE AN EXPERT WITH INTERNATIONAL SHIPPING...................

IT MAY BE LESS EXPENSIVE FOR YOU TO SOURCE ONE FROM.........MAYBE "NICKS GARAGE"?.............

PLEASE INQUIRE WITH YOU'RE SHIPPER OF CHOICE,,,,,,,,,,,,,,,,,,SAY 30 POUNDS FROM NEVADA USA 89014 TO YOU........

MoPar2Ya!!

[email protected]
John