nos 426 440 block s

[jim picanzo]

doe any one have an idea of value of nos over the counter 64 426 wedge block,over counter 65 426 wedge block. both nos.nos 1968 440 hp dated 67 over counter,nos 1970 440 over counter block,non hp,,426 crossram intake and carbs nos,any idea.of value

 

[Jerry Hall]

doe any one have an idea of value of nos over the counter 64 426 wedge block,over counter 65 426 wedge block. both nos.nos 1968 440 hp dated 67 over counter,nos 1970 440 over counter block,non hp,,426 crossram intake and carbs nos,any idea.of value

I don't have any idea on a value. I will be watching with interest. Can we assume that you own them, or just know where they are at?

 

[jim picanzo]

i own them

 

[WP29440SE]

it's going to weigh heavily on the condition of them. have they been pulled up from the Titanic or sitting in an oil bath?
pictures would go a long way here

 

[jim picanzo]

high and dry.no rust

 

[PROSTOCKTOM]

Some of the bouftique Mopar restoration specialist will most likely be willing to pay more for them than the average guy.

Tom

 

[Officer Higgins]

No way stuff that old, with today's environment hardly worth anything. I'm willing to give you 500 bucks cash for all of them, I'll even come get them.

 

[beanhead]

Block cores are worth usually $250-$500 depending on condition. Unless it's something exciting and can be proven as such (hemi, max wedge, etc) they're all just cores. Nothing super special.
Now, the crossram and carbs, if the numbers check out on that stuff, those ARE special....those are worth more than than all the blocks together, in my opinion..

 

[jim picanzo]

Block cores are worth usually $250-$500 depending on condition. Unless it's something exciting and can be proven as such (hemi, max wedge, etc) they're all just cores. Nothing super special.
Now, the crossram and carbs, if the numbers check out on that stuff, those ARE special....those are worth more than than all the blocks together, in my opinion..

so nos 68 and 70 440 block are 250 to 500?and 64 65 max wedge nos 250 to 500?ill take all u can find

 

[Jerry Hall]

so nos 68 and 70 440 block are 250 to 500?and 64 65 max wedge nos 250 to 500?ill take all u can find

Pictures of the 64-65 blocks please, especially the surfaces for the heads.

 

[beanhead]

so nos 68 and 70 440 block are 250 to 500?and 64 65 max wedge nos 250 to 500?ill take all u can find

OH, which is it? you just said "wedge', now they're 'max wedge' blocks? I would think you'd know the difference? .....NOS? You think someone's gonna just throw a 50 year-old 440 block together and install it? They're CORES. You asked. You don't like it, go to E-bay or Craigslist. And still no pictures?

 

[biomedtechguy]

 

[JackpotJim]

I don't know much about the Max wedge internals on the early engines. What is the difference between a wedge block and a Max wedge block? Thank you.

 

[6t4polara]

Pad stamping and valve reliefs.

 

[66Satellite47]

How did you determine these are NOS? Do these have pad stampings?

 

[Steve009]

Paying attention to this one. Max wedge NOS 64 426 block? Sounds lovely!

 

[biomedtechguy]

Where has the OP gone??
Seems like as the request for pictures increased, the train out of town was pulling out the station...

 

[jim picanzo]

Pictures of the 64-65 blocks please, especially the surfaces for the heads.

soon as i get a chance

 

[moparpoor]

So the 426 blocks I’ve seen listed around $1200. NOS block with the right dates may even go higher. The 440 blocks they are around. The dates on the 440 blocks are desirable for restoration purpose if they have the right numbers and are not warranty blocks.

 

[jim picanzo]

So the 426 blocks I’ve seen listed around $1200. NOS block with the right dates may even go higher. The 440 blocks they are around. The dates on the 440 blocks are desirable for restoration purpose if they have the right numbers and are not warranty blocks.

thank you