flypaper
Well-Known Member
- Local time
- 7:36 PM
- Joined
- Jul 17, 2008
- Messages
- 16,870
- Reaction score
- 26,814
Contact seller
parting another 71 satellite
i got ahold of this set of hurtin bones just before the scrap yard was going to get it.
before you ask
no bolt on sheetmetal is left, all gone before i got this pig.
i only got this wreck to steal off a good outer rocker panel for my project.
roof has bad front pillar rust, rest not too bad for patches
drivers front rail shot
cowl/firewall shot ng
wheelhouses shot ng
dutchman shot
speaker panel shot
torsion x member shot
floors are shot front to rear
yeah put it out of its misery..
keep in mind the ride is extra
here is whats left and a few
left overs from the last 71 i parted
26 inch rad core support upper, lower,both sides - 175
pass side frame rail, have 2 - 125 w bad inner fender
180 with ok inner fender
rear frame rails,have 2 sets - 100 a pair some pitting w ng rear x member
200 a pair nice shape with good rear x member
ply trunk gutter all 3 pieces - 200
gas tank supports - 40 pr
71 v8 k frame - 100
4 k frame bolts- 25
71 neutral safety switch harness- 40
71 81/4 rear - 125
headliner bow set- 20
trunk lid supports/rods - 25
71 roll up side windows/tracks/regulators with clear glass
all you need for roll up conversion - 250 pr
i do have extra roll up regulators and track parts
71 lower control arms no sway tabs - 40 a pair i have a few pairs
i have a very nice low level black 71 steering wheel switch and pad- 175
71 wiper pivots - 50 pr
auto brake pedal supports/pedal have a few - 5 ea
also other assorted 71 ply trinkets just ask, i might have a extra one kickin around.
i got ahold of this set of hurtin bones just before the scrap yard was going to get it.
before you ask
no bolt on sheetmetal is left, all gone before i got this pig.
i only got this wreck to steal off a good outer rocker panel for my project.
roof has bad front pillar rust, rest not too bad for patches
drivers front rail shot
cowl/firewall shot ng
wheelhouses shot ng
dutchman shot
speaker panel shot
torsion x member shot
floors are shot front to rear
yeah put it out of its misery..
keep in mind the ride is extra
here is whats left and a few
left overs from the last 71 i parted
26 inch rad core support upper, lower,both sides - 175
pass side frame rail, have 2 - 125 w bad inner fender
180 with ok inner fender
rear frame rails,have 2 sets - 100 a pair some pitting w ng rear x member
200 a pair nice shape with good rear x member
ply trunk gutter all 3 pieces - 200
gas tank supports - 40 pr
71 v8 k frame - 100
4 k frame bolts- 25
71 neutral safety switch harness- 40
71 81/4 rear - 125
headliner bow set- 20
trunk lid supports/rods - 25
71 roll up side windows/tracks/regulators with clear glass
all you need for roll up conversion - 250 pr
i do have extra roll up regulators and track parts
71 lower control arms no sway tabs - 40 a pair i have a few pairs
i have a very nice low level black 71 steering wheel switch and pad- 175
71 wiper pivots - 50 pr
auto brake pedal supports/pedal have a few - 5 ea
also other assorted 71 ply trinkets just ask, i might have a extra one kickin around.
Last edited: