FOR SALE Parting Out: 1971 Charger

Mopar Parts Cars/Parting out

Thread Status:
Not open for further replies.
  1. Chase383

    Chase383 Well-Known Member

    Messages:
    221
    Likes Received:
    39
    Joined:
    Jul 31, 2012
    Location:
    Pearland, Tx.
    Local Time:
    12:04 AM
    Contact Seller
    Hey Guys,

    My parts car is seriously cramping my available space, so I need to get rid of the good parts. Only the items listed below are available, everything else is rotted beyond belief or I will be using it on my 71 Plymouth. Prices below are less shipping, I don't mind shipping small parts, but I can't ship the sheetmetal and running gear. I wish I could, but their is not a local Greyhound and Fastenal is in the a couple cities over. I work 60 hours a week so I asked interested parties to be patient with me.

    NOTE: any interested parties that are close to me, if you are interested in large portion of the parts below, I will give a substantial package discount if you want to come over, talk Mopars and help me pull the parts of this car in the sweltering Gulf Coast weather.


    Flat Hood (has some filler in the leading edge) $50

    Vertical support, latch plate and hood latch $25

    Both Front Fenders, with headlamp buckets and hardware (Rt fender has typical lower rust, Lt Fender has some filler on the top) $300 each

    Front and Rear Valace panels (both are dented up) $75 for the pair

    Both front and rear bumper assemblies including brackets $50 each

    Front Grilles (Rt side cracked) $50 for the pair

    Rt Door shell (seems to be pretty rust free) $100

    Lt Door shell is kinda rusty, you can have it for free if you buy the Rt Door

    Rocker Moldings (set, thin style) $65

    Both Lt Side Wheel opening moldings $ 50 for both

    Leading edge Hood/Fender Stainless (missing RT fender piece) $75

    Stainless Molding for back of Hood/Fenders (complete) $90

    Inner and Outer Drip Rail stainless (complete, both sides) $150

    Wide Stainless Moldings for Doors and C-pillars (complete) $125

    Full Vinyl Top Trim (missing Rt qtr panel piece) $75

    Rear Window Stainless (embossed style for vinyl tops, top two pieces only) $50

    Rear Qtr Fillers with stainless moldings $75 for both

    Complete set of Side Markers $75

    Complete 71 and up Slapstick shifter and linkage (Handle cracked) $75

    71 318 2 barrel and 904 trans, this engine is largely unmolested and even has the original air cleaner on it. It does crank and tries to fire on with starting fluid... I have no idea of its internal condition. $100

    8 1/4" rear axle, minus drums and shock plates $50


    Think a price is too high? Never hurts to shoot me an offer, what ever I sell will help my other two Mopars in need. I don't want to throw good (or at least, usable) parts in the trash. Ever feel crushed when you find out somebody else pitched the part you needed... me too.

    I'm all for horse trading, if you have '71 Roadrunner or '68 Coronet parts, let me know.
     

    Attached Files:

  2. Chase383

    Chase383 Well-Known Member

    Messages:
    221
    Likes Received:
    39
    Joined:
    Jul 31, 2012
    Location:
    Pearland, Tx.
    Local Time:
    12:04 AM
    I've been busy pulling trim off tonight.

    If you need pics let me know and I'll snap some.

    Also, the thin rocker moldings I have listed above. I took a closer look at them. Somebody drilled extra holes in them. If you want them, you can have them for free if you pick them up, or pay actually shipping/packaging, which may be kinda high since I'll have to ship them in a long tube.

    Both front and rear valance panels are also pretty hammered. If you are local and want them, they are yours.
     
  3. 451Mopar

    451Mopar Well-Known Member

    Messages:
    2,414
    Likes Received:
    1738
    Joined:
    Oct 25, 2011
    Location:
    Aurora, CO
    Local Time:
    11:04 PM
    How much for just the front edge fender stainless trim?
    Is the drivers side grill good? You mentioned right side is cracked (is that passenger or drivers side?)
    Wish you were closer, I could use the fenders too.
    How dented up are the valances and bumpers?
    What tail lights does the car have?
     
  4. Chase383

    Chase383 Well-Known Member

    Messages:
    221
    Likes Received:
    39
    Joined:
    Jul 31, 2012
    Location:
    Pearland, Tx.
    Local Time:
    12:04 AM
    I'll sell the front hood and Lt fender stainless for $75 OBO plus shipping. I don't want to split them up.

    I was wrong on the grille, the LT side is cracked.

    The valances are hammered... I won't sugar coat it.

    If the sheetmetal doesn't sell soon... I'd be willing to ship if somebody can find a shipper. But my sorta-local Fastenal doesn't want to ship sheetmetal.

    Tail lights are gone.
     
  5. vitamin c

    vitamin c FBBO Gold Member FBBO Gold Member

    Messages:
    215
    Likes Received:
    71
    Joined:
    Nov 7, 2012
    Location:
    Holland Mi
    Local Time:
    1:04 AM
    id be interested in the hood latch. I need the "exterior/ non remote" hood release mechanism and handle that protrudes through the grille. PM me if available.
     
  6. Chase383

    Chase383 Well-Known Member

    Messages:
    221
    Likes Received:
    39
    Joined:
    Jul 31, 2012
    Location:
    Pearland, Tx.
    Local Time:
    12:04 AM
    PM sent
     
  7. 74charger07ram

    74charger07ram Well-Known Member

    Messages:
    397
    Likes Received:
    95
    Joined:
    Aug 14, 2013
    Location:
    Weatherford Texas
    Local Time:
    12:04 AM
    Do you have the front left and right parking light lenses, rear defrost, sail panels? Also how are the left and right lower rear quarters? Thanks
     
  8. Chase383

    Chase383 Well-Known Member

    Messages:
    221
    Likes Received:
    39
    Joined:
    Jul 31, 2012
    Location:
    Pearland, Tx.
    Local Time:
    12:04 AM
    Parking light lenses are toast, but I have the housings

    No rear defrost

    I can send pics of the interior sail panels if you PM you email address

    Lower qtrs are beyond junk.
     
  9. plumgtx

    plumgtx Well-Known Member

    Messages:
    150
    Likes Received:
    17
    Joined:
    May 24, 2014
    Location:
    virginia
    Local Time:
    12:04 AM
    How are the rear frame rails? Are they identical to 71 gtx rails? If there nice I need them thanks
     
  10. Chase383

    Chase383 Well-Known Member

    Messages:
    221
    Likes Received:
    39
    Joined:
    Jul 31, 2012
    Location:
    Pearland, Tx.
    Local Time:
    12:04 AM
    PMs replied to.
     
  11. old_skool

    old_skool Well-Known Member

    Messages:
    799
    Likes Received:
    215
    Joined:
    Mar 29, 2014
    Location:
    Litchfield, Oh.
    Local Time:
    1:04 AM
    pm sent, interested in vinyl roof
     
  12. Chase383

    Chase383 Well-Known Member

    Messages:
    221
    Likes Received:
    39
    Joined:
    Jul 31, 2012
    Location:
    Pearland, Tx.
    Local Time:
    12:04 AM
    Hood latch is SPF
     
  13. Chase383

    Chase383 Well-Known Member

    Messages:
    221
    Likes Received:
    39
    Joined:
    Jul 31, 2012
    Location:
    Pearland, Tx.
    Local Time:
    12:04 AM
    Sale pending on fenders, grilles, wheel opening moldings.

    Front valance and rear bumper went in the trash... tired of tripping over them.


    The rest of the car is starting to head that way too.
     

    Attached Files:

  14. 451Mopar

    451Mopar Well-Known Member

    Messages:
    2,414
    Likes Received:
    1738
    Joined:
    Oct 25, 2011
    Location:
    Aurora, CO
    Local Time:
    11:04 PM
    Not sure if you were referring to me, but I'm passing on the grills and front fender trim.
     
  15. MikeyT

    MikeyT Well-Known Member

    Messages:
    875
    Likes Received:
    184
    Joined:
    Jul 18, 2008
    Location:
    Wisconsin
    Local Time:
    12:04 AM
    Let me know if the latch
    Mechanism doesn't sell
     
  16. Chase383

    Chase383 Well-Known Member

    Messages:
    221
    Likes Received:
    39
    Joined:
    Jul 31, 2012
    Location:
    Pearland, Tx.
    Local Time:
    12:04 AM
    No I wasn't, I think it I got your message? To be honest, I've answered numerous PMs and emails to get absolutely no response in return.
     
  17. ming

    ming Well-Known Member

    Messages:
    51
    Likes Received:
    67
    Joined:
    Jan 10, 2012
    Location:
    new york
    Local Time:
    1:04 AM
    Hi, do you still have wheel opening molding?
    Thanks
    Ming
     
  18. rs1

    rs1 Well-Known Member

    Messages:
    484
    Likes Received:
    24
    Joined:
    Nov 7, 2011
    Location:
    nj
    Local Time:
    12:04 AM
    do you have a front license bracket?
     
  19. Mr. M state

    Mr. M state Member

    Messages:
    8
    Likes Received:
    0
    Joined:
    Apr 15, 2016
    Local Time:
    12:04 AM
    Do you have the rear glass? If so how much, I'm in Mississippi
     
  20. '68 Charger

    '68 Charger Well-Known Member

    Messages:
    1,464
    Likes Received:
    417
    Joined:
    Jun 18, 2012
    Location:
    Akron, Ohio
    Local Time:
    1:04 AM

    PM sent.
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.