Pinion Snubber

[Suave25]

Hey guys

Wanted to know if anyone has recommendations on Adjustable Pinion Snubber 8-3/4 for stock application (Brand has to and must be Made in Good Old USA). I looked around and some of them are too long. Also looking into Pinion Snubber Plate to reinforce the floor if anyone has a design or measurments.

Thanks

 

[QuickBpBp]

Are you talking about The MP one that is too long? I have cut them down on a band saw and they worked fine...

https://www.summitracing.com/parts/...1871114009712&utm_content=GSAPI+5c59c3060def8

There is also this style that's adjustable might be smaller than the MP version..

https://www.proformparts.com/produc...e-pinion-snubber-chrysler-8-3-4-screw-in-type

 

[Suave25]

Are you talking about The MP one that is too long? I have cut them down on a band saw and they worked fine...

https://www.summitracing.com/parts/...1871114009712&utm_content=GSAPI+5c59c3060def8

There is also this style that's adjustable might be smaller than the MP version..

https://www.proformparts.com/produc...e-pinion-snubber-chrysler-8-3-4-screw-in-type

I think the ones that screw are probably the best rather than the pin with holes

 

[Splangj]

I had to cut my pin style snubber down, then welded it solid. What’s the ideal clearance for a street/strip car anyway?

 

[Wietse]

I had to cut my pin style snubber down, then welded it solid. What’s the ideal clearance for a street/strip car anyway?

Interesting question, i have the MP version with the pin.
My guess is mine is around 3/4"-1" clear of the floor.