please help identify this shroud

General Mopar Tech Discussions

  1. rbkt65

    rbkt65 Active Member

    Messages:
    39
    Likes Received:
    10
    Joined:
    Mar 19, 2011
    Location:
    jerseyville,illinois
    Local Time:
    4:15 PM
    i have been cleaning out upstairs of garage. i found a 2 piece metal shroud that i don't remember where it came from. i stripped out a 67 coronet 4 door for parts for my 67 500 a long time ago. maybe from it. just need better eyes/mind to take a looksee. it is 22.5 inches wide and bolts together in middle and attachment holes are on the side where it may bolt to core support. would like to know what it might fit. if not a b body i will move it to correct site. thanks in advance. 20200206_142553.jpg 20200206_142100.jpg 20200206_142053.jpg 20200206_142031.jpg
     
  2. Polara426

    Polara426 Well-Known Member

    Messages:
    211
    Likes Received:
    80
    Joined:
    May 3, 2010
    Location:
    norteast ohio
    Local Time:
    4:15 PM
    22 inch early b body shroud?
     
  3. rbkt65

    rbkt65 Active Member

    Messages:
    39
    Likes Received:
    10
    Joined:
    Mar 19, 2011
    Location:
    jerseyville,illinois
    Local Time:
    4:15 PM
    thank you very muck. i have had several 65's and 3 66-67's. so it must b off one of them thanks again.
     
  4. Ski 61701

    Ski 61701 Well-Known Member

    Messages:
    680
    Likes Received:
    529
    Joined:
    Nov 21, 2016
    Location:
    Bloomington Illinois
    Local Time:
    4:15 PM
    Looks like an early B body shroud. There are 4 little offset brackets that bolt to side of shroud and other side goes to the capsulated nuts in the radiator housing itself .
     
  5. rbkt65

    rbkt65 Active Member

    Messages:
    39
    Likes Received:
    10
    Joined:
    Mar 19, 2011
    Location:
    jerseyville,illinois
    Local Time:
    4:15 PM
    thanks again for info. i looked at my 65-68 parts books and found paart numbers 2417423/424. it looks like my pics. i did have a number of 65's . i googled those numbers and boy are they proud of that shroud. anywhere from 195 for upper 1/2, to 308 for repop. again thanks to all for id help.
     
  6. Ski 61701

    Ski 61701 Well-Known Member

    Messages:
    680
    Likes Received:
    529
    Joined:
    Nov 21, 2016
    Location:
    Bloomington Illinois
    Local Time:
    4:15 PM
    Yes they are proud of those parts. Happy to help.

    Side note , would you have a hood safety latch for a 64 Polara in your stash that you don't need?
     
  7. rbkt65

    rbkt65 Active Member

    Messages:
    39
    Likes Received:
    10
    Joined:
    Mar 19, 2011
    Location:
    jerseyville,illinois
    Local Time:
    4:15 PM
    i will look. will let you know by pm. thanks rick.
     
  8. Ski 61701

    Ski 61701 Well-Known Member

    Messages:
    680
    Likes Received:
    529
    Joined:
    Nov 21, 2016
    Location:
    Bloomington Illinois
    Local Time:
    4:15 PM
    Thank you
     
  9. rbkt65

    rbkt65 Active Member

    Messages:
    39
    Likes Received:
    10
    Joined:
    Mar 19, 2011
    Location:
    jerseyville,illinois
    Local Time:
    4:15 PM
    I looked at my house and went to a buddy that said he did, but he did not. Sorry
     
  10. Ski 61701

    Ski 61701 Well-Known Member

    Messages:
    680
    Likes Received:
    529
    Joined:
    Nov 21, 2016
    Location:
    Bloomington Illinois
    Local Time:
    4:15 PM
    I appreciate your time you spent looking.
    Steve
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.