69Runner
Well-Known Member
Looking for the pump and bracket for a 67 pump on a 440. Thanks FBBO. Believed to be TRW pump based on pictures showing difference between TRW and Federal.
Last edited:
SOLD PS pump bracket for 440
- Thread starter 69Runner
- Start date
- Status
cr8crshr
Well-Known Member
- Local time
- 2:58 PM
- Joined
- Feb 13, 2009
- Messages
- 7,947
- Reaction score
- 15,323
- Location
- Northwest Nevada
What type pump? Federal/Thompson or Saginaw? Pic would be helpful also...
69Runner
Well-Known Member
cr8 thank you for the question! I am learning about the differences as I write this, now I'm quite certain it's TRW but from a 318 so maybe the pulley is too close to the reservoir compared to a 440?
What started as a simple observation regarding pulley alignment has led me to realize I'm lucky it even works!
What started as a simple observation regarding pulley alignment has led me to realize I'm lucky it even works!
challengersteve
Well-Known Member
Hello, what you have is a small block Thompson pump that has been "modified" to fit the big block. I have a correct pump and bracket setup on a 68 383 HP parts car I just brought in so if you would like to PM me for my number we can discuss this tomorrow.
Thanks, Steve
Thanks, Steve
- Status
Similar threads
- Locked
