• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE Rebuilt 8 3/4 Sure Grip - Moser

Status
Not open for further replies.

Flys-Lo

Well-Known Member
Local time
7:08 PM
Joined
Aug 4, 2011
Messages
273
Reaction score
105
Location
Akron, Ohio
Feedback: 0 / 0 / 0
Contact seller
489 Housing
7290 Fine Spline Yoke.

Never been installed, never run. Brand new.
Ready to install and go.

New Kit Including:
Nut, Bearings, Races, Shims, Seal,
Ratech Spacer
3.55 Ring And Pinion

Parts & Set Up by Moser Engineering.

$850
Located in Akron, Ohio.
Shipping extra. (from 44216, Akron Ohio)

Credit cards accepted - add 3%

39917075_10213179241101368_3158849112204378112_n.jpg 39878762_10213179242381400_2190534570519035904_n.jpg 39983944_10213179242181395_2050802817475543040_n.jpg 39891301_10213179241901388_6083054531711598592_n.jpg 39951629_10213179241661382_2529485572678877184_n.jpg 39950174_10213179241181370_7654030912912359424_n.jpg
 
Last edited:
Is that a small yoke
 
Yes. As long as you have an 8 3/4 housing you just pull your axles out about 10”, swap your unit for the sure grip and reinstall. There’s a bit of adjustment, etc but to answer your question, stock axles work fine.

Would this work with a stock axle?
 
Status
Not open for further replies.
Auto Transport Service
Back
Top